Related Manuals for netvox RA02A
Summary of Contents for netvox RA02A
- Page 1 RA02A Model： Wireless Smoke Sensor RA02A User Manual Version History Date Description Version 2017-11-30 Initial Release V0.1...
-
Page 2: Table Of Contents
T able of Content 1. Statement.................................. 2 2. Appearance................................2 3. Introduction................................3 4. Main Features................................3 5. Setting Instruction..............................3 5.1 Power on / Turn on / Turn off...........................3 5.2 Join Into Lora Network............................ 4 5.3 Function Key..............................4 6. Restore to Factory Setting............................5 7. -
Page 3: Statement
In no event will Netvox be liable for any loss of data or income or any special, incidental, consequential or indirect damages, regardless of the cause of the loss. -
Page 4: Introduction
3. Introduction RA02A is a smoke detector for Netvox Class-A devices based on the LoRaWAN open protocol and is compatible with the LoRaWAN protocol. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. -
Page 5: Join Into Lora Network
Power off while the device is on: Unload the batteries and wait till the capacitor is discharged (10 seconds); insert the batteries back to the device. At this time, the device is at turned on mode by default (has been turned on and there is no need to press any key to turn on the device). -
Page 6: Restore To Factory Setting
Remarks: The real configuration depends on individual order requirement. The interval between two reports must be the minimum time. Trigger smoke detector: After power on, smoke detection begins. When the status of the smoke changes, the buzzer alarms and immediately sends a report (fire alarm bit is 1). When the alarm is over, a report is sent (the fire alarm bit is cleared). -
Page 7: Sleeping Mode
8. Low Voltage Alarming The operating voltage threshold is 2.4V. If the voltage is lower than 2.4 V, RA02A will send a low-power report to the Lora network. -
Page 8: Mydevice Dashboard Demonstration
9. MyDevice Dashboard Demonstration 10. Installation This product does not have a waterproof function. After networking joining is completed, please place it indoors. This product is not suitable for places where there is a large amount of dust and water mist; it is not suitable for places where steam and oil mist may be generated; it is not suitable for places where smoke is normally retained. - Page 9 • Do not apply with paint. Smudges can block debris in detachable parts and affect normal operation. • Do not throw the battery into a fire to prevent the battery from exploding. Damaged batteries may also explode. All of the above suggestions apply equally to your device, battery and accessories. If any device is not working properly.