Table of Contents
Advertisement
1.2 Part names
1.2.1 Front camera (main unit) - front view
GPS LED
Indicates the GPS
connection status.
Recording LED
Indicates the
recording status.
Wi-Fi LED
Indicates the Wi-Fi
connection status.
Outputs the voice guide and buzzer
sounds to indicate the product's status.
Press and hold to turn off the product.
• To reset the product, press and hold the voice recording (
you hear beeps.
• The security LED status may vary depending on the selected mode.
• Refer to the following table to check the status of the product using the LED indicators.
For more information about the REC LED, refer to "3.3 Using the continuous recording feature" on page 17.
LED
BT/WiFi
GPS
Misc.
Speaker
Power button
Press to turn on the product.
LED status
(light on) /
>
>
Wi-Fi
REC
>
Voice recording button
Press to enable or disable voice recording.
REC button
• Press to start manual recording.
• Press and hold for 3 seconds for SOS recording.
Wi-Fi button
Press and hold for 3 seconds to connect the
product to a smartphone via Wi-Fi network.
) and REC (
(light on)
(flickers)
(flickers)
(light on)
(light on)
GPS
(flickers)
>
Product overview
Format button
Press and hold to
format the memory
card.
V-IN input port
Used to connect the
rear camera (optional).
DC-IN power port
Used to connect the
power cable.
) buttons simultaneously until
Operation description
Wi-Fi connected
Bluetooth on/Bluetooth pairing
Bluetooth/Wi-Fi reset
Internet Mode connected
GPS connected
Firmware upgrade
7
Advertisement
Table of Contents
