Page 1
Power the Dash Cam Use one of the following options The included cable options vary depending on the dash cam model purchased 12V Power Cable Hardwiring Cable* OBD-II Cable* * To enable Parking Surveillance mode, the dash cam needs to be powered by either the OBD-II Cable or Hardwiring Cable (professional installation recommended).
Page 3
Connect to the App Follow in-app instructions Wi-Fi Flickers Hold for more than 3 sec Won't Connect?
Page 4
Install the Front Camera How to Install Align blue line with center of the hood Align green line with the front edge of the hood Open “Live View” in the app...
Page 5
Install the Rear View Camera (optional) Click Open “Live View” in the app...
Page 6
Choose Your Preferred Dash Cam Settings in the App Default settings out of the box Voice Recording Enabled System Volume 0 1 2 3 Parking Mode Motion Detection Smart Parking Mode Thermal Protection Enabled Long-Time Recording Disabled Battery Protection Enabled Vehichle Type : Regular Super Night Vision Parking Mode ADAS...
Page 7
To Use THINKWARE CONNECTED Features, Download the App and Register Your Dash Cam* * Requires a Compatible Dash Cam How to Register Your Dash Cam...
Page 8
Still have questions or issues? FAQs & Help Desk 1 (844) 865-9273 North America support@thinkware.com 44 (0) 333-121-0008 United Kingdom support.eu@thinkware.com (+49) 69-943-22200 European Union support@thinkware.com Please refer to ‘CS Information QR’in the box for other countries...
Need help?
Do you have a question about the Q850 and is the answer not in the manual?
Questions and answers