Recording Manually; Using The Sos Recording Feature - Thinkware Q850 User Manual

Using recording features
* When an impact to the vehicle is detected during continuous recording, incident continuous recording starts with a
double beep sound.
• Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).
• When incident continuous recording starts, a double "beep" sounds as a notification. This function saves
you time when checking the status LED to know the operating status of the product.
• To enable recording, you must insert a memory card into the product.

3.4 Recording manually

You can record a scene you want to capture while driving and store it as a separate file.
To start manual recording, press the REC (
guide. During manual recording, the product operates as follows.
Mode
Manual recording

3.5 Using the SOS recording feature

You can record a scene when an accident occurs while driving or parked and store it as a separate file.
To start SOS recording, press the REC (
SOS recording has started.
During SOS recording, the product operates as follows.
Mode
SOS recording
According to the data service policy, if you have used all of the SOS recording upload usage times, pressing
the REC ( ) button will save the recorded video to the SD card, but may not upload it to the THINKWARE
CONNECTED LTE application. Visit THINWARE website (https://www.thinkware.com) for more information.
18
When you press the REC (
1 minute, from 10 seconds before to 50 seconds after pressing the
button, and stored in the "manual_rec" folder.
) button for 3 seconds. Then, the voice guide will indicate that
If you press the REC (
occurs, a video will be recorded for 10 seconds (from 5 seconds
before the accident to 5 seconds after pressing the button) and
stored in the "sos_rec" folder.
) button. Then, manual recording will start with the voice
Operation description
) button, a video will be recorded for
Operation description
) button for 3 seconds when an accident
Recording LED (REC)
(flickers)
Recording LED (REC)/
Wi-Fi LED (WiFi)
(flickers)