Table of Contents
Advertisement
3. Using recording features
3.1 Turning the product on or off
The product is turned on automatically and continuous recording starts when you turn on the ACC or start
the engine.
Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).
3.2 Learning about file storage locations
Videos are stored in the following folders according to their recording mode.
On the
Continuous
mobile viewer
In the memory
cont_rec
card
Play videos on Window/Mac computer or using the Thinkware mobile app. If you play videos by inserting
the memory card in devices such as a smartphone or a tablet PC, the video files may be lost.
A file name is composed of the recording start date and time, and the recording option.
YYYYMMDD_HHMMSS
REC_20240122_182052_F.MP4
REC_20240122_182052_R.MP4
3.3 Using the continuous recording feature
Connect the power cable to the product's DC-IN power port and then turn on the vehicle's electrical accessories
or start the engine. The status LED and the voice guide are turned on, and the continuous recording starts.
During continuous recording, the product operates as follows.
Mode
Continuous
recording
Incident continuous
recording*
Continuous
Incident
evt_rec
During driving, videos are recorded in 1 minute segments and stored
in the "cont_rec" folder.
When an impact to the vehicle is detected, a video is recorded for
20 seconds, from 10 seconds before the detection to 10 seconds after
the detection, and stored in the "evt_rec" folder.
Manual
Motion
Recording
Detection
manual_rec
motion_timelapse_rec
Recording conditions
• F: Front camera
• Rear camera (when optional rear camera is equipped)
Operation description
Parking
SOS
Incident
Recording
parking_rec
sos_rec
Recording LED (REC)
(light on)
(flickers)
17
Advertisement
Table of Contents
