Table of Contents
Advertisement
3.6 Using parking mode
When the product is connected to the vehicle via the hardwiring cable, the operating mode is switched to
parking mode with the voice guide after the engine or electrical accessories are turned off.
• Parking mode operates only when the hardwiring cable is connected. The hardwiring cable must be
professionally installed to the vehicle by a trained mechanic.
• To use all recording modes, you must insert a memory card into the product.
• Depending on the battery charging status of the vehicle, the duration of parking mode may differ. If you
want to use parking mode for an extended period, check the battery level to prevent battery depletion.
If you do not want to use parking mode or you want to change the mode settings, from the mobile viewer,
tap Dash Cam Settings
Refer to the following table to set the Parking Mode options.
Option
No motion
or impact
detected
Motion
Motion
detected
Detection
Impact
detected
No impact
detected
Time Lapse
Impact
detected
No impact
detected
Energy
Saving
Impact
detected
OFF
Record Settings.
>
Operation description
Monitors movement in the area or impacts to the vehicle. Video
will be recorded only when motion or an impact is detected.
When a moving objects is detected while parking, a video is
recorded for 20 seconds, from 10 seconds before detection to
10 seconds after detection, and stored in the "motion_timelapse_
rec" folder.
When an impact is detected while parking, a video is recorded
for 20 seconds, from the moment 10 seconds before detection to
10 seconds after detection, and stored in the "parking_rec" folder.
A videos is recorded at a rate of 2 fps for 10 minutes, compressed
into a 2-minute long file, and stored in the "motion_timelapse_
rec" folder. Since the video file recorded with this option is small,
you can record a long video.
When an impact is detected while parking, a video is recorded
for 100 seconds at a rate of 2 fps, from the moment 50 seconds
before detection to 50 seconds after detection, and stored in the
"parking_rec" folder after being compressed into a 20-second
long file. (The buzzer will sound.)
Monitors impacts to the vehicle. Video will be recorded only
when an impact is detected.
When an impact is detected while parking, a video is recorded for
20 seconds from within 1 second after detection and stored in the
"parking_rec" folder.
The product is powered off when electric accessories and the
engine are turned off.
Using recording features
Recording LED (REC)
(flickers slowly)
(flickers)
(flickers)
(light on)
(flickers)
Off
(flickers)
Off
19
Advertisement
Table of Contents
