Advertisement

Register Your Device Now!
(The product warranty will be included upon product purchase and cannot be issued again.)
iNAVI BLACK
Before using our
attached on the rear of the product and register your product with the serial number to our iNAVI home page.
Only registered users have access to a full range of customer support and after-service sales support.
(Any user who has not registered his/her product must have the product warranty with the purchase
This product is the vehicle drive recorder (VDR) that records the driving video of a car.
Depending on the driving conditions, vehicle type, and navigation environments, some
functions may not be supported. Functional support related to firmware updates for more
reliable and advanced quality may vary by product. In addition, please use this apparatus
as a reference to check the driving video since the video recording function may not work
in some environments or conditions.
This product does not guarantee that it records all videos of accidents and any accidents
caused by an impact not big enough to trigger the impact sensor (G-SENSOR) may not
be identified as an event video and, consequently, may not be recorded.
Before getting started with the
iNAVI BLACK Clair2 is a trademark of THINKWARE.
All descriptions and contents included in all of THINKWARE's manuals are protected by relevant copyright laws.
All other products and services used in this manual are the registered trademarks of their respective owners.
All rights on this program are owned by THINKWARE and protected by relevant copyright laws. Any unauthorized copy, replication,
modification, reproduction, or distribution of this program without the prior written agreement of THINKWARE will be subject to criminal
prosecution, based on software relevant copyright laws, carrying the maximum penalty of a five-year jail sentence and fine of 50 million
KRW.
All description and contents provided in this manual are provided AS-IS and may include any technical or editorial omissions or errors.
For the purpose of performance improvement, the specifications and information regarding the iNAVI BLACK Clair2 in this manual are
subject to change without prior notice to users.
For the purpose of performance improvement, this manual is subject to change without prior notice to users.
Colors of images in this manual may be different from the actual screen colors due to the print quality.
In no event shall this product be used differently from its original purpose, nor arbitrarily changed. In accordance with the 'Privacy
Protection Laws and relevant laws, ' if any others' voice is recorded in this product using the recording function, the user shall accept
liability for its recording.
To register your device, go to www.inavi.com. [Upgrade > Register Product]
Clair2, please check the serial number written on the product warranty or
date to access any type of support from iNAVI.)
iNAVI BLACK Clair2
Issue date : 28
......
Sep. 2012, Issued by: THINKWARE
th
ACMA-0183KR103

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iNAVI BLACK Clair2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Thinkware iNAVI BLACK Clair2

  • Page 1 All description and contents provided in this manual are provided AS-IS and may include any technical or editorial omissions or errors. For the purpose of performance improvement, the specifications and information regarding the iNAVI BLACK Clair2 in this manual are subject to change without prior notice to users.
  • Page 2: Table Of Contents

    CONTENTS Chapter 01 General Information Safety Instructions ....................4 Components .......................8 Part Names ........................9 How to Install the Product .................. 11 Chapter 02 Basic Information Basic Functions ....................... 16 Chapter 03 Menu PC Viewer PC Viewer........................33 Chapter 04 Other Information Specifications ......................
  • Page 3 Chapter 01 I General Safety Instructions Product Power Driving Product Management and Customer Support Components Basic Components Optional Components Part Names Front/Rear Top/Bottom How to Install the Product How to Insert/Remove Micro SD Memory Card 11...
  • Page 4: Safety Instructions

    Safety Instructions The following instructions are given to ensure your safety and prevent the loss of property. Read them thoroughly and ensure the product is correctly used. Warning Caution Indicates that violation of the Indicates that violation of the instruction may cause death instruction may cause human or serious human injury.
  • Page 5 Just softly clean it with a cloth. Otherwise, they may be seriously injured. Do not drop the product nor disassemble without any direction of THINKWARE. Do not press the Reset button with anything sharp. It may result damage or failure of the product.
  • Page 6: Power

    Safety Instructions Power Do not touch the cigar jack cable Insert the cigar jack cable until power cable with wet hands. it is stable. This may result in electrical shock. Unstable connection may result in fire. Do not use any damaged cigar Do not bend, pull, or press the jack cable.
  • Page 7: Driving

    You may be distracted, resulting in a car accident. This may result in an accident. Product Management and Customer Support THINKWARE does not guarantee Be careful that no foreign material compatibility with third-party’s enters the product or cables. devices or peripherals.
  • Page 8: Components

    Components Components are subject to change for performance or quality improvement without notice. You can order new components at iNAVI Shopping Mall (http://mall.inavi.com). Basic Components Three Cable Holders Vehicle Drive Recorder Holder Cigar Jack Cable (three) expendables Micro SD Memory Card Micro SD Adaptor User Manual Optional Accessories...
  • Page 9: Part Names

    Chapter 01 I General A/V OUT Part Names The images presented here may be different from the product. (For the purpose of the improvement of the performance of quality of the product, the parts may be changed without any prior notice.) Front Rear Voice Recording...
  • Page 10: Top/Bottom

    Part Names Bottom USB terminal Power IN Terminal Micro SD Memory Card Slot micro SD RESET A/V OUT Terminal Microphone RESET GPS terminal Name Function Description USB Terminal By interworking with iNAVI Navigation, it plays and manages the recorded video. Power IN Terminal Connects the power cable.
  • Page 11: How To Install The Product

    Chapter 01 I General How to Install the Product How to Insert/Remove Micro SD Memory Card Insert the micro SD memory card into the micro SD memory card slot according to the arrow direction showed on the SD memory card slot. Inserting direction Removing direction Rear...
  • Page 12 How to Install the Product By adjusting the grooves on the holder-connector, connect it the black box. Slide the holder onto the wider groove of the black box’s holder connector and push it to until it ‘clicks’ and firmly fits in. Remove a film from the double-sided tape and attach one side to the holder.
  • Page 13 Chapter 01 I General How to Install the Product Remove the camera lens protection file. If the film is not removed, the quality of recorded video will be degraded. Be careful not to stain the lens with fingerprints. Connect the power cable (cigar jack cable) and organize the cable using the cable holders.
  • Page 14 www.inavi.com w w w . i n a v i . c o m...
  • Page 15: Chapter 02 I Basic Information

    Chapter 02 I Basic Information Basic Operation Connecting the Power Power ON/OFF Connecting the External GPS Antenna (Optional) 17 Connecting the AV OUT (Optional) Recording while Driving Auto parking mode setting (default setting) Manual parking mode setting Recording while parking Recording file Manual Recording Setting Voice Functions...
  • Page 16: Basic Functions

    Basic Operation Connecting the Power Install the product and then turn ON the power of the product or start up the product. The operation status LEDs blink in three colors Three colors blinking ) with Please have a safe and enjoyable drive today. voice guidance.
  • Page 17: Connecting The External Gps Antenna (Optional)

    Chapter 02 I Basic Basic Operation Connecting the External GPS Antenna (Optional) Make sure that you turn off the GPS LED power before connecting the external GPS terminal for receiving The GPS has been connected. GPS info. Connect the external GPS terminal and turn on the power.
  • Page 18: Connecting The Av Out (Optional)

    STATE Displaying recorded micro SD video Please use the standard AV cable recommended by THINKWARE. If any unsupported AV cable is connected, this may result in damage to the product, for which THINKWARE does not accept any liability. Item Plug ø...
  • Page 19: Recording While Driving

    Chapter 02 I Basic Basic Operation micro SD Recording while Driving SD FORM AT STA TE Continuous Recording micro SD All videos are recorded in interval of one-minute and saved in Continuous recording folder. SD FORM AT STA TE micro SD Operation Status LED SD FORM AT Starts the continuous...
  • Page 20: Auto Parking Mode Setting (Default Setting)

    Basic Operation Auto parking mode setting (default setting) SD FORM AT When the vehicle power is turned off, the STA TE mode is automatically changed to the micro SD ParkingMode with voice guidance. Cross blinking You need the PC Viewer and Live View configuration.
  • Page 21: Recording While Parking

    Chapter 02 I Basic SD FORM AT STA TE Basic Operation micro SD Recording while parking When any motion or impact or motion is detected within the recording scope of the black box, the operation status LED ( ) lights on in red. Event detection recording : Records scenes SD FORM AT for 20 seconds, from 10 seconds before the...
  • Page 22: Recording File

    Basic Operation Recording file The recording folder created in the Micro SD card is based on date/time in the order of time. In the created folder, files in the unit of date/time are created. The recording file is created based on the recording start time.
  • Page 23: Manual Recording

    Chapter 02 I Basic Basic Operation Manual Recording Instead of only recording accident videos, you can record what you want to keep such as beautiful scenery or places as well as any scenes which must not be deleted. Manual Recording SD FORM AT In Continuous recording mode, the pressing of STA TE...
  • Page 24: Setting Voice Functions

    SD FORM AT Basic Operation STA TE micro SD Setting Voice Functions Voice Recording ON/OFF Press the Voice Recording ( ) button to turn ON/OFF voice recording with beep sound. Starts/stops voice recording. SD FORMAT SD FORM AT SD FORM AT STA TE STA TE micro SD...
  • Page 25: Setting Security Led

    Chapter 02 I Basic Basic Operation SD FORM AT STA TE micro SD Setting Security LED Press the Voice guidance ( ) button for a few seconds to turn ON/OFF the Security LED. Start/stop Security Security LED ON Security LED OFF LED.
  • Page 26: Playing Mode

    Basic Operation Playing Mode After power off, connect power while Start video playback. pressing the REC( ) button and Playing Mode starts. SD FORMAT SD FORMAT STATE STATE micro SD micro SD Connect the external devices to the black box using AV-OUT cable. It is recommended to use the standard AV-OUT cable guaranteed by our company.
  • Page 27: Formatting Micro Sd Card

    Chapter 02 I Basic STA TE Basic Operation micro SD Formatting Micro SD Card SD FORM AT STA TE micro SD - Press the SD Memory Format ( ) button for a few seconds and then the operation status LED blinks in green and the Micro SD card can be formatted.
  • Page 28: Button Functions

    Basic Operation Button Operation Button Pressed for less than 3 seconds Pressed for more than 3 seconds Voice Recording button voice recording setting/disabled Voice Guidance Button voice guidance setting/disabled Security LED ON/OFF SD Memory Format Button Photo Shooting Formats the SD memory Button Manual Recording Sets/Ends Parking Mode...
  • Page 29 Chapter 02 I Basic Basic Operation Operation Status LED and Voice (BEEP) Operation Mode Operation Mode Voice Recording (ON) Voice Recording (OFF) Parking Recording (Waiting) Cross blinking Setting  Start Parking recording. Voice Guidance Releasing  End Parking recording. Event Recording Motion Recording Parking Recording (during recording)
  • Page 30 Basic Operation Operation Status LED and Voice (BEEP) Operation Mode Operation Mode Firmware Upgrade Blinking in Red Voice Guidance Start upgrade. Abnormal operation (malfunction, bad recording) Blinking in Red / Blue / Green Supports voice guidance according to the situation. Voice Guidance Ex: Insufficient space in the Event Recording Folder.
  • Page 31: Chapter 03 I Menu

    Chapter 03 I Menu PC Viewer PC Viewer Installing a Program Screen Configuration Getting Started View the Recording Folder View Full Screen View Map Self-diagnosis Black Box Setting > Video Black Box Setting > Audio Black Box Setting > Parking Mode Black Box Setting >...
  • Page 32 PC Viewer...
  • Page 33: Pc Viewer

    You can view the video file recorded by the black box through the PC Viewer. To play the saved video file on the PC, you must download the program from the THINKWARE home page. www.inavi.com > Upgrade > Black Box Upgrade and then download the setup file.
  • Page 34: Screen Configuration

    PC Viewer Screen Configuration Update the firmware and view the version info Configuration Accident Report Acceleration Screen Access the iNAVI Web site. Gauge Capture Self-diagnosis Hide/Full Screen/End View Map Immediately shows the record- ing location and point (only when the Internet is connected) Playback Screen...
  • Page 35 Chapter 03 I Menu PC Viewer Screen Configuration Play the Previous File Open a Drive Plays the previous file of Opens the removable storage the one which is playing. device where the recording files are saved Play the file / Resume Save the recording file Saves the recording file Play the recorded file / Resume the file play...
  • Page 36: Getting Started

    PC Viewer The micro SD memory card reader is an additional product. You can buy it through the iNAVI homepage. Executing a PC Viewer Insert the micro SD memory card into the micro SD Front card reader by placing it in with the top of the card upwards and connect to the PC.
  • Page 37 Chapter 03 I Menu PC Viewer Executing a PC Viewer Open a Drive ( Select the removable storage device of the micro SD card connected to the PC and select OK. Setup file in Micro SD memory card Click Open ( When the model (number) appears on the screen after reading Setup file, select the setting (configu- ration) correspond to that model (number)
  • Page 38: View The Recording Folder

    PC Viewer View the Recording Folder You can view the list of recording files by selecting each recording folder (Continuous Recording, Event Record- ing, Manual Recording, and Motion Recording). Continuous Recording List Screen Event Recording List Screen www.inavi.com...
  • Page 39: View Full Screen

    Chapter 03 I Menu PC Viewer View Full Screen Click the Full Screen ( ) icon on the top of the PC Viewer to enlarge the play screen to the full screen of the monitor. On the full screen, click the Zoom out icon on the top of the PC Viewer to change the screen to the standard screen display ratio.
  • Page 40: View Map

    PC Viewer View Map Click the Zoom-in Map icon on the upper right hand corner of PC Viewer to enlarge the map to the full screen. On the full screen, click the Zoom- out Map to switch over the screen to the front view.
  • Page 41: Self-Diagnosis

    Chapter 03 I Menu PC Viewer Self-diagnosis For A/S he self-diagnosis of the black box is carried out. Menu includes Examination Date/ Product Name/Resolution/Quality Setting/ Brightness/Contrast/Sharpness/ Voice Recording/Voice Comment/ Voice Comment Volume/Camera Location/ Acceleration Sensor Sensitivity/ Memory Partition/Event File Overwriting/ Manual Recorded Video Overwriting/ Recorded Motion File Overwriting.
  • Page 42: Black Box Setting > Video

    PC Viewer Black Box Setting > Video - 1 Quality The resolution of iNAVI BLACK Clair2 is set to the following by default. VGA(640X480) (not available) HD(1280X720) (default value) FHD(1920X1080) (not available) Frames You can set the recording frame of the black box to three levels: Variable: Min.
  • Page 43 Chapter 03 I Menu PC Viewer Black Box Setting > Video - 2 Video Quality Displays the time and number of the recording files by Continuous/Event/ Manual/Parking recording to the Quality setting. : Continuous Area : Event Area : Manual Area : Motion Area The value varies according to the memory partition setting set in...
  • Page 44: Black Box Setting > Audio

    PC Viewer Black Box Setting > Audio Voice Recording Turns on or off the voice recording of the black box. Use (default setting) Not Use: Voice comment Turn on/off the voice comment of the black box. Use (default setting) Not Use: www.inavi.com...
  • Page 45: Black Box Setting > Parking Mode

    Chapter 03 I Menu PC Viewer Black Box Setting > Parking Mode - 1 Recording Quality Sets the recording quality of a video for the Parking recording. - Recording time and the number of events saved differs according to the memory partition setting.
  • Page 46 PC Viewer Black Box Setting > Parking Mode - 2 Timer Setting for Parking Recording When the parking recording is made using the continuous power of the vehicle, the parking recording is ended after the specified time is expired in order to prevent battery discharge.
  • Page 47 Chapter 03 I Menu PC Viewer Black Box Setting > Parking Mode - 3 Notes for Setting Parking Mode (based on 12V of Range of voltage for parking mode: vehicle battery) Min. 12.4V Max. 13.1V When it takes too much time to change the mode to Auto Parking mode while driving, or while parking, raise Changing the mode When it takes too much time...
  • Page 48 PC Viewer Black Box Setting > Parking Mode - 4 Setting Security LED You can set movement of the security LED to three types: Mode 1 (Left/Right scroll): The LED moves left and right. (default setting) Mode 2 (Blinking): All LEDs blink at the interval of 0.5 second.
  • Page 49: Black Box Setting > Additional Functions

    Chapter 03 I Menu PC Viewer Black Box Setting > Additional Functions - 1 System Time You can set the date and time of the product. - To modify the time and save it, first unlock the settings by clicking the checkbox on the right side.
  • Page 50 PC Viewer Black Box Setting > Additional Functions - 2 Camera location (position) (reversal display) Install the black box on the glass or on the dashboard to prevent the display being upside down. Acceleration Sensor Sensitivity Adjust the sensitivity of the acceleration sensor of the black box on a scale of 0 to (Insensitive ( ) ...
  • Page 51 Chapter 03 I Menu PC Viewer Black Box Setting > Additional Functions - 3 Memory partition In Configuration, you can set the capacity ratio of Continuous/Event/Manual/Mo- tion recording by each memory (A/B/C). A Type (Recommended): Continuous Recording-centered B Type: Event/Manual Recording- centered (using double capacity of A type) C Type: Event/Manual Recording-...
  • Page 52 PC Viewer Black Box Setting > Additional Functions - 4 Setting Value 16GB 32GB  Event Recording:  Event Recording:  Event Recording: 400MB (about 9 minutes) 800MB (about 18 minutes) 1600MB (about 36 minutes) Type A  Motion Recording: ...
  • Page 53 Chapter 03 I Menu PC Viewer Black Box Setting > Additional Functions - 5 Setting Overwrite by Recording Video Determines whether or not to delete the oldest file when the Event/Manual/ Motion recording memories of the black box are full. www.inavi.com...
  • Page 54 PC Viewer Black Box Setting > Additional Functions - 6 Memory Format Format the micro SD card where the recording files are saved. Click the Memory Format button and a memory format window appears. Select each format option in the format window and click the Start button to execute format.
  • Page 55 Chapter 03 I Menu PC Viewer Black Box Setting > Additional Functions - 7 Apply the settings After completing the settings, click the Save button to save the settings to the micro SD card. The saved configuration file is created as the setup.cfg file in the Setting folder of the micro SD card.
  • Page 56 PC Viewer Black Box Setting > Additional Functions - 8 Resetting the Configuration To apply the initial setting values, not the user-specified values, click the Reset Values button on the right bottom side of the screen. The setting values are saved in the micro SD card.
  • Page 57: Black Box Setting > Acceleration Gauge

    Chapter 03 I Menu PC Viewer Black Box Setting > Acceleration Gauge Display left/right, rotation/vibration/ impact and other information using the acceleration of gravity on 3 axes (X, Y, Z) based on the data acquired by the sen- sor, which recognizes the acceleration of gravity applied on the car.
  • Page 58: Black Box Setting > Accident Report

    PC Viewer Black Box Setting > Accident Report When you click Accident Report while playing the video, the video immedi- ately stops and the time, GPS data and speed (appeared on the screen) are displayed. (Printable) Save: the data is saved as [inaviBlack_ Accident Report.jpb] on the desktop.
  • Page 59: Screen Capture

    Chapter 03 I Menu PC Viewer Screen Capture Capture the images of the recorded video being playing now. Click the Capture icon on the top of the PC Viewer to capture the screen currently being played. When the video screen is captured, a Windows Explorer screen appears to search the folder where the captured image will be saved as...
  • Page 60: Version Info And Firmware Download

    PC Viewer Version Info and Firmware Download Click the Firmware button on the top of the PC Viewer and an Update Firmware Information window appears. Viewer Version On the Version Info on the Update Firmware window, you can view the version information on the PC Viewer and firmware being used.
  • Page 61 Chapter 04 I Others Product Specifications Customer Center Product Registration Before requesting A/S... Q&A and Request A/S Product Warranty...
  • Page 62: Specifications

    For the purpose of the improvement of the performance of quality of the product, the parts may be changed without any prior notice. Item Specifications Remarks Model iNAVI BLACK Clair2 Dimensions/Weight 110 x 38 x 33.3mm / 73.7g Capacity Micro SD Memory Card 8/16/32GB...
  • Page 63: Product Specifications

    Chapter 04 I Other Product Specifications Item Specifications Remarks Auxiliary power source super-capacity Panorama White LED Security LED LED displaying status of connection to Alarm LED Operation Status LED and GPS Alarm Built-in speaker Voice (BEEP) guide External Output NTSC Operation Temperature/ -10~60°C Storage Temperature...
  • Page 64: Customer Center

    Therefore, please keep in mind that THINKWARE is not liable for such deletions of data carried out in the process of A/S.
  • Page 65 Chapter 04 I Other Thank you for purchasing the THINKWARE iNAVI product. Customer Center Q&A and Request A/S If you feel any problem or inconvenience while using our product, please call to the following contact before visiting our A/S center.
  • Page 66 MEMO...
  • Page 68: Product Warranty

    All replaced products shall be new products or products having similar functions. ■ THINKWARE is not liable for the repair, replacement, or refund of any product until the customer returns the defected product to THINKWARE. ■ This warranty shall not be re-issued. Please keep this warranty. (The serial number is not re-issued.) ■...

Table of Contents