Using Recording Features; Turning The Product On Or Off; Learning About File Storage Locations; Using The Continuous Recording Feature - Thinkware Q200 User Manual

3. Using recording features

3.1 Turning the product on or off

The product is turned on automatically and continuous recording starts when you turn on the ACC or start
the engine.
Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).

3.2 Learning about file storage locations

Videos are stored in the following folders according to their recording mode.
On the mobile viewer
In the memory card
Play videos on Window/Mac computer or using the Thinkware mobile app. If you play videos by inserting
the memory card in devices such as a smartphone or a tablet PC, the video files may be lost.
A file name is composed of the recording start date and time, and the recording option.
YYYYMMDD_HHMMSS
REC_20240222_102530_F.MP4
REC_20240222_102530_R.MP4

3.3 Using the continuous recording feature

Connect the power cable to the product's DC-IN power port and then turn on the vehicle's electrical
accessories or start the engine. The status LED and the voice guide are turned on, and the continuous
recording starts.
During continuous recording, the product operates as follows.
Mode
Continuous During driving, videos are recorded in 1 minute segments and stored in the
recording "cont_rec" folder.
Continuous
Continuous
Incident
cont_rec evt_rec
Operation description
Manual
Recording
manual_rec
Recording conditions
• F: Front camera
• R: Rear camera (when optional rear camera is equipped)
Motion Parking
Detection Incident
motion_
parking_rec
timelapse_rec
STATUS LED
(light on)
17