Setting Recording Features - Thinkware Q200 User Manual

Settings

6.3 Setting recording features

From the mobile viewer, tap Dash Cam settings
Options
Continuous Mode Incident
Recording Sensitivity
Set Privacy Recording
Voice Recording
Parking Mode
Parking Mode Waiting Time
Smart Parking Recording
Impact Sensitivity in Parking
Mode
Motion Detection Sensitivity
Off Timer
Battery Protection
Vehicle Type
Battery Cutoff voltage
Wintertime Battery Protection
• To use parking mode, you must install the hardwiring cable. If continuous power is not supplied to the
product, the product will stop recording when the vehicle engine is turned off.
• The vehicle battery will not be charged while the vehicle is parked. If you record in parking mode for an
extended period, the vehicle's battery may be depleted and you may not be able to start the vehicle.
• For more information about parking mode, refer to "3.5 Using parking mode" on page 18.
• The battery cutoff voltage can be set only when the Battery Protection setting is set to Enabled.
• If the off voltage value is too low, the product may consume the battery completely depending on the
conditions like the vehicle type or temperature.
26
Record Settings to manage the recording features settings.
>
Select from Disabled/Lowest/Low/Mid/High for the sensitivity.
You can set the privacy recording feature to delete your recorded files after a
set amount of time to protect the privacy of others. Select from OFF/1min (max.
2min)/3min (max. 4min)/G-Shock only for the privacy recording setting. If it is set
to G-Shock only mode, then it is not consistently recorded.
Select from Enabled/Disabled for the voice recording.
Select from Disabled/Motion Detection/Time Lapse/Energy Saving for the parking
mode.
Select from 30 sec./1 min./2 min./3 min./4 min./5 min. for the parking mode waiting
time (time to switch to parking mode).
Select from Thermal Protection/Long-time Recording.
Select from Lowest/Low/Mid/High/Highest for the parking mode sensitivity.
Select from Lowest/Low/Mid/High/ Highest for the motion detection mode
sensitivity.
Select from Disabled/3hrs/6hrs/12hrs/24hrs/48hrs/72hrs for the record time.
Select from Enabled/Disabled for the battery protection.
Select from Regular car/Hybrid car/Electric car for the vehicle type.
Select from 12V (11.6-12.3)/24V (23.2-24.6) for the battery cutoff voltage.
Select the month(s) to apply the battery protection feature.
Description