Thinkware Q200 User Manual page 19

Refer to the following table to set the Parking Mode options.
Option
No motion
or impact
detected
Motion Motion
Detection detected
Impact
detected
No impact
detected
Time
Lapse
Impact
detected
No impact
detected
Energy
Saving
Impact
detected
Disabled
If parking mode settings are changed, the videos recorded with the previous settings will be deleted. To
prevent data loss, back up all parking mode videos before changing parking mode settings.
Monitors movement in the area or impacts to the vehicle. Video will
be recorded only when motion or an impact is detected.
When a moving objects is detected while parking, a video is recorded
for 20 seconds, from 10 seconds before detection to 10 seconds after
detection, and stored in the "motion_rec" folder.
When an impact is detected while parking, a video is recorded
for 20 seconds, from the moment 10 seconds before detection to
10 seconds after detection, and stored in the "parking_rec" folder.
A videos is recorded at a rate of 2 fps for 10 minutes, compressed into
a 2-minute long file, and stored in the "motion_timelapse_rec" folder.
Since the video file recorded with this option is small, you can record
a long video.
When an impact is detected while parking, a video is recorded for
100 seconds at a rate of 2 fps (from the moment 50 seconds before
detection to 50 seconds after detection) and stored in the "parking_
rec" folder after being compressed into a 20-second long file. (The
buzzer will sound.)
Monitors impacts to the vehicle. Video will be recorded only when an
impact is detected.
When an impact is detected while parking, a video is recorded for
20 seconds from within 1 second after detection and stored in the
"parking_rec" folder.
The product is powered off when electric accessories and the engine
are turned off.
Operation description
Using recording features
STATUS LED
(flickers slowly)
(flickers quickly)
(flickers quickly)
(light on)
(flickers quickly)
Off
(flickers quickly)
Off
19