Using The Super Night Vision; Using The Road Safety Features (Optional) - Thinkware Q200 User Manual

Using recording features

3.6 Using the Super Night Vision

With the Super Night Vision feature, you can record videos that are much brighter than those recorded
without this feature. This feature is enabled by real-time image signal processing (ISP) that improves the
video brightness. This feature is available in the continuous recording and parking modes and is only
available on the front camera.
<When Super Night Vision is deactivated>
1
From the mobile viewer, tap Dash Cam Settings
2
From Super Night Vision, select the desired recording mode to use the Super Night Vision feature. The
new setting is applied automatically.

3.7 Using the road safety features (optional)

The road safety features include a safety camera alert system, a lane departure warning system (LDWS),
a forward-collision warning system (FCWS), a low speed Forward collision warning system (low-speed
FCWS), and a front vehicle departure warning (FVDW).
Safety feature
LDWS
(Lane Departure Warning)
FCWS
(Forward Collision Warning)
Low Speed FCWS
FVDW
(Front Vehicle Departure Warning)
Road safety features are performed differently depending on the set speed and sensitivity of the features.
20
Record Settings.
>
Detects the lane departure via the real-time video and warns the driver.
Detects forward collision threats via the real-time video and warns the driver
when the vehicle is moving at 40 km/h or above.
Detects forward collision threats via real-time video and warns the driver
when the vehicle is moving at 10-40 km/h.
Detects the departure of another vehicle that was previously stationary in
front of the vehicle and notifies the driver after four seconds (Beep).
<When Super Night Vision is activated>
Description