Drainage Instructions - HOMCOM 823-049V70 Instruction Manual

Table of Contents

Advertisement

Important Notice:
The length of the exhaust hose shall be 280~1,500mm, and this length is based on the
specifications of the air conditioning. Do not use extension tubes or replace it with other
different hoses, or this may cause a malfunction. Exhaust host must be not blocked;
otherwise it may cause overheating.
VI. Drainage Instructions
This machine has two drainage methods: manual drainage and continuous drainage.
1. Manual drainage:
1) When the machine stops after the water is full, turn off the machine power and unplug
the power plug.
Notes: Please move the machine carefully, so as not to spill the water in the water
pan at the bottom of the body.
2) Place the water container below the side water outlet behind the body.
3) Unplug the water plug, the water will automatically flow into the water container.
Notes: 1) Keep the drainage cover and the water plug properly.
2) During drainage, the body can be tilted slightly backwards.
3) If the water container cannot hold all the water, before the water container is
full, stuff the water outlet with the water plug as soon as possible to prevent
water from flowing to the floor or the carpet.
4) When the water is discharged, stuff the water
plug, and tighten the drainage cover
2. Continuous drainage (Optional) (only applicable to
dehumidifying mode), as shown in figure:
1) Unplug the water plug.
2) Set the drainage pipe into the water outlet.
3) Connect the drainage pipe to the bucket.
11

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading
Need help?

Need help?

Do you have a question about the 823-049V70 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents