Vi.drainage Instructions - HOMCOM 823-028V70 Assembly Instructions Manual

1 、 the flat end of the exhaust pipe joints must be snapped into place.
2 、 The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the
ventilation of the exhaust pipe not blocked.
Figure 5
Important Notice:
The length of the exhaust hose shall be 280~1,500mm, and this length is based on the
specifications of the air conditioning. Do not use extension tubes or replace it with other
different hoses, or this may cause a malfunction. Exhaust host must be not blocked;
otherwise it may cause overheating.

VI.Drainage Instructions

This machine has two drainage methods: manual drainage and continuous drainage.
1. Manual drainage:
1) When the machine stops after the water is full, turn off the machine power and unplug the
power plug.
Notes：Please move the machine carefully, so as not to spill the water in the water pan at
the bottom of the body.
2) Place the water container below the side water outlet behind the body.
3) Unscrew the drainage cover and unplug the water plug, the water will automatically flow
into the water container.
Figure 6
11