Checking Mobile Units, Modules And Inserts - Miele PLW 8615 Safety Operating Instructions Manual

Maintenance
76

Checking mobile units, modules and inserts

Mobile units, modules and inserts should be checked daily to make
sure they are functioning correctly. A checklist is supplied with the
cleaning machine.
The following points must be checked:
- Are the guide rails in good condition, and are they securely at-
tached to their mobile units?
- Are the counter nuts for the guide rails tightened securely?
- Are the caps in the module connectors of the modular system mo-
bile units working properly?
- Are all injector nozzles, irrigation sleeves and hose adapters se-
curely attached to mobile units or inserts?
- Are all injector nozzles, irrigation sleeves and hose adapters clear
so that wash water can flow through unhindered?
- Are all caps and fasteners securely attached to the irrigation
sleeves?
If spray arms are present:
- Do the spray arms rotate freely?
- Are the spray arm nozzles free from blockages (see "Maintenance"
– "Cleaning the spray arms")?
- Are the magnets present at the end of the spray arms?
- Are the magnets at the end of the spray arms free from metallic ob-
jects?
If compressed air containers are present:
- Are the seals in the quick-release couplings intact?
Mobile units, modules and inserts must be inspected periodically to-
gether with the machine after 2000 operating hours or at least once
per year, see "Maintenance" – "Periodic checks".