Miele PLW 8615 Safety Operating Instructions Manual page 73

Machine spray
arms
Spray arms on
mobile units and
modules
Remove the spray arms as follows:
Remove any mobile units from the wash chamber.

Loosen the securing clip on the spray arm connection and then pull

the lower spray arm upwards and the upper spray arm downwards.
Loosen the securing clip on the spray arm connection and then pull

the spray arm downwards.
If there is considerable visible wear on the bearing on the spray arm,
contact the Miele Customer Service Department as this can result in
functional problems.
Reinsert the spray arms after cleaning the secure them with the se-

curing clips. Ensure that the securing clips are seated correctly.
After replacing the spray arms, check that they rotate freely.
 Insufficient cleaning results due to an incorrectly measured
spray arm speed.
There are powerful magnets at the end of the spray arms. If metal-
lic objects get stuck on these magnets, this can cause a false read-
ing of the spray arm rotation speed.
Remove any metallic objects which are stuck to the magnets, e.g.
instrument parts.
Maintenance
73