Dispensing liquid chemical agents
Filling containers
with process
chemicals
40
Fill the containers for process chemicals or replace them with a full
container if a corresponding message is displayed, e.g.
tainer for dispensing system 1
1
Unlock the service panel on the machine .
Tilt the service panel forwards , lift it up and lift it out of its lower
brackets.
Pull out the drawer with the containers for liquid process chemicals.
Take the corresponding container out of the drawer.
Unscrew and remove the suction lance.
Fill the process container with the required process chemical and
replace it with a new container.
Observe the colour code of the dispensing system and the suction
lance to ensure that the process chemicals do not get mixed up.
.
2
Fill con-