Advertisement
Wind Deflector Kits
LineLazert Airless Line St ripers
3300 psi (22.7MPa, 227 bar) Maximum Working Pressure
Model 245519
6-in. Plastic Wind Deflector
Model 277066
6-in. Aluminum Wind Deflector
Model 245520
12-in. Wind Deflector
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
277066
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440- 1441
Copyright 2005, Graco Inc. is registered to I.S. EN ISO 9001
'
ti6612a
311069 rev.A
245519
ti6613a
245520
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Graco 245519
Summary of Contents for Graco 245519
- Page 1 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 245519 ‘ ti6613a 245520 ti6612a 277066 GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440- 1441 Copyright 2005, Graco Inc. is registered to I.S. EN ISO 9001...
- Page 2 Pressure Relief Procedure WARNING INJECTION HAZARD Fluid under high pressure can be in- jected through the skin and cause 4-1/2” serious injury. To reduce the risk of an injury from injection, splashing fluid, or moving parts, follow the Pressure Relief Procedure whenever you: D are instructed to relieve the pressure, D stop spraying/dispensing,...
- Page 3 12-in. 6-Inch 116999* SCREW, snap, self--tapping, #7 SNAP, washer 198572 6--in. 12-Inch ti6616 198572 12-in. * Needed for Model 245519 6-in. deflector installation. Fig. 3 5. Fig. 4. Snap wind deflector in place on bead dispenser. ti6615a Fig. 4 311069...
- Page 4 Graco distributor to the original purchaser for use. With the exception of any special extended or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
Need help?
Do you have a question about the 245519 and is the answer not in the manual?
Questions and answers