Graco 207994 Instructions-Parts List Manual

INSTRUCTIONS-PARTS LIST
HIGH PRESSURE, MEDIUM VOLUME
"red alert" Filters
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
3000 psi (210 bar) Maximum Working Pressure
Model 207994:
with 30 mesh (590 micron) element
Model 207995:
with 60 mesh (250 micron) element
Model 207996:
with 100 mesh (149 micron) element
Model 207997:
with 150 mesh (95 micron) element
Model 207998:
with 200 mesh (74 micron) element
Model 207999:
with 0.040 in. (1 mm) stab point element
Model 208000:
with 0.050 in. (1.3 mm) stab point element
Model 102929:
less element--see back page for element numbers
SKIN INJECTION HAZARD
Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and cause
extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin
can also cause serious injury.
D Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgi-
cal treatment.
D Do not point the gun at anyone or at any part of the body.
D Do not put your hand or fingers over the spray tip.
D Do not stop or deflect leaks with your hand, body, glove or rag.
D Follow the Pressure Relief Procedure on page 4 whenever you: are instructed to relieve pres-
sure; stop spraying; clean, check, or service the equipment; and install or clean the spray tip.
D Tighten all fluid connections before operating the equipment.
D Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately.
Permanently coupled hoses cannot be repaired; replace the entire hose.
WARNING
306987J
0779