Table of Contents
Advertisement
Use
protective
equipment
Warning
Do not
attempt alone
Inspection
Periodic
replacements
Caution
Follow all
regulations
Prohibited
Check
Caution
labeling
Maintenance, Repair and Disposal
Wear a dusk mask and gloves when cleaning the thin film
of the feed through collar of the bell jar.
The thin film can turn into a fine dust and may be inhaled.
The glass bell jar weighs approximately 13 kg. It should
only be installed or removed by at least two people.
Risk of accidents or back pain.
The fixing clip and eye bolt at either end of the hoist's wire
rope should be inspected daily to make sure they have
not come loose.
May cause the bell jar to fall.
The oil mist trap element (sold separately) should be
replaced every six months to one year.
If the element becomes clogged, exhaust resistance can build up and
cause oil leakage from the shaft seal or damage to the oil level
gauge.
Waste oil used in the pump must be disposed of in
accordance with all relevant laws and regulations.
Please handle waste oil in accordance with the laws and regulations.
If anything is unclear, please contact us directly.
Do not modify this product using any parts other than the
standard optional parts provided by our company.
We will not be responsible for any consequences.
Warning Labels
Warning labels are attached to the following locations:
bell jar cover
1)
main valve handle
2)
hoist brace
3)
liquid nitrogen trap
4)
rough pipe
5)
upper right side of the electrode switch
6)
Please contact us if the labels become dirty and difficult to read, or
begin to peel off.
F
Advertisement
Table of Contents
