Switch Cooling Requirements; Figure 9: Switch Cooling (Ecs2100-28P And Ecs2100-28Pp); Figure 10: Switch Cooling (Ecs2100-52T); Figure 11: Switch Cooling (Ecs2100-10T/10P/10Pe, Ecs2110-26T And Ecs2100-28T) - Edge-Core ECS2100-10P Installation Manual
10/28/52-port web-smart pro gigabit ethernet switch, 26-port web-smart pro 10g ethernet switch
Hide thumbs
Also See for ECS2100-10P:
- Reference manual (725 pages) ,
- Installation manual (51 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Chapter 3
| Switch Chassis
Switch Cooling Requirements
Switch Cooling Requirements
Wherever the switch is located, be sure to pay close attention to switch cooling
requirements. The location should be well ventilated and provide unrestricted
airflow at the front, back, and sides of the switch. If the airflow is insufficient, it may
cause the switch to overheat and possibly fail.
The ECS2100-28P/ECS2100-52T switch is equipped with one cooling fan and the
ECS2100-28PP switch is equipped with three cooling fans. The following figure
shows the cool air intake and the hot air exhaust airflow into and from the switch.
Figure 9: Switch Cooling (ECS2100-28P and ECS2100-28PP)
Figure 10: Switch Cooling (ECS2100-52T)
The ECS2100-10T, ECS2100-10P, ECS2100-10PE, ECS2110-26T and ECS2100-28T use
a fanless cooling design. The following figure shows the convective airflow from
the switch.
Figure 11: Switch Cooling (ECS2100-10T/10P/10PE, ECS2110-26T and ECS2100-
28T)
– 23 –
Advertisement
Table of Contents
