Table of Contents
Advertisement
7 Navigating the setup menus
Once you enter Menu Mode, the various menu options are shown on the display and navigated using the Up,
Down and Middle/OK (select) buttons.
The display shown above is the main Menu, with the various sub-menus shown in the left column and the
parameters adjustable in the selected menu (in this case the Audio Settings menu) in the right column.
The Up and Down buttons move the menu selection up and down the left column of the screen (the selected
sub-menu/ parameter is highlighted). As each sub-menu/parameter is selected, the options available will be
shown in the right column.
Once the correct menu/parameter has been selected, a push on the Middle button will enter that selection. Once
you have navigated to the correct menu and set the required parameter, another push on the Middle button will
store that setting.
Note that some parameters are input-specific, while others are global. For instance, you can individually adjust
the input gain of each P10 input, while the feedback setup or absolute phase polarity are global parameters that
affect operation of all inputs. All input-specific parameters are located in the INPUTS menu.
7.1 Menu options
If you study the menu tree laid out below, you can see the various options and where to find them. It may look
confusing to start with, but it soon becomes clear and easy to navigate.
Below the menu tree is a list of the various sub-menu options and their significance. These options are the key
to configuring your P10, delivering the best performance, personalized user interface and connection with your
system. It is worth studying the various options and their importance as they will directly affect your enjoyment of
your system.
SETUP
AUDIO
INPUTS
DISPLAY
SHORTCUTS
NETWORK
FACTORY
P10 SETUP screen items
P10 User Manual
Mute
>
Phase polarity
Phone EQ
Channel mode
C
Feedback
22
Advertisement
Table of Contents
