Outputs; Ac Power - CH P10 User Manual

The inputs are all numbered. When making connections, ensure that you note which turntable or tonearm/
cartridge is connected to which input, so that you can identify each one correctly in the configuration menu.
You can later name each P10 input to identify the connected turntable or tonearm/cartridge and hide/disable
the ones you won't use for now.

5.6 Outputs

The P10 is equipped with one pair of balanced XLR, RCA and 50Ω BNC outputs. This allows for connection to
all standard line-stages.
If you need additional outputs (for instance, to use one set of turntables to run two separate systems) then
the four-chassis extended configuration will provide twice the number.

5.7 AC Power

With all the signal inputs and outputs connected, you can now connect the IEC power cord to the input socket
on the P10 power supply and switch the units on. First switch on the rocker switch on the rear of the power
supply unit. You should see the red bar in the CH logo in the top-left corner of each front panel illuminate.
Your P10 is now in standby mode and ready to be turned on and configured.
P10 User Manual 18