Table of Contents
Advertisement
5 Power, audio and control connections
With the two (or four) P10 units placed and levelled, you are now ready to connect them to your system and the
AC power. The rear panel layout is shown below:
1
2
29
28
27
(1) MC 1 XLR left input
(2) MC 1 RCA left input
(3) MC 2 RCA left input
(4) MC 2 XLR left input
(5) MM/MC 1 XLR left input
(6) MM/MC 1 RCA left input
(7) MM/MC 2 RCA left input
(8) MM/MC 2 XLR left input
(9) XLR left output
(10) RCA left output
(11) BNC left output
(12) Ethernet port for network connection/Control App
(13) Ground lift switch
(14) Multi pin socket for analog PSU connection (blue)
(15) Multi pin socket for control PSU connection (red)
You will note that as well as the array of conventional inputs and outputs, there are a number of other sockets
available which are used for control and update functions.
3
4
5
6
7
8
26
25
24
23
22
P10 audio unit rear panel connections
P10 User Manual
9
10
11
12
13
21
20
19
18
17
(16) Signal ground connection
(17) Chassis ground connection
(18) USB port for firmware upgrades only
(19) RCA right output
(20) BNC right output
(21) XLR right output
(22) MM/MC 2 XLR right input
(23) MM/MC 2 RCA right input
(24) MM/MC 1 RCA right input
(25) MM/MC 1 XLR right input
(26) MC 2 XLR right input
(27) MC 2 RCA right input
(28) MC 1 RCA right input
(29) MC 1 XLR right input
14
15
16
15
Advertisement
Table of Contents
