Table of Contents
Advertisement
6 How to configure and operate your P10
The P10 phono-stage can be operated in any of three different ways:
From the front-panel buttons
From the CH-Control App (Android only)
From the supplied IR remote control (for switching basic settings only)
The initial set up should be done using the front panel buttons and the menus shown on the display. Once
configured for connection to and control by the CH-Control App, all parameters can be adjusted or re-set remotely.
Button 1. Mute(NP) Operate/Standby (LP)
Button 2. Up
Button 3. Next/OK
In use, your P10 has two operating modes: Normal mode and Menu mode.
Button 4. Down
Button 5. Cancel/Exit
P10 User Manual
1
2
3
4
5
19
Advertisement
Table of Contents
