Example: Linpac (Linux Os) - ICP DAS USA I-8213W-4G Series User Manual

7.2. Example: LinPAC (Linux OS)

To read GPS NMEA data from the i-8213W-4G interface "/dev/ttyUSB1", follow
the steps below:
Step 1：Enter the command " echo -e "AT+QGPS=1 \r\n" > /dev/ttyUSB2 > /dev/ttyUSB2
"
Step 2：Input the command "cat /dev/ttyUSB1", the result is as follows, GPS
information will be output continuously.
I-8213W-4G Series User Manual version 1.3 Page：39
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail：service@icpdas.com