Page 1
(ANT-421-04) Software USB Cable Utility (CA-USB18) Technical Support I-8213W-4G User Manual and USB Driver http://ftp.icpdas.com/pub/cd/usbcd/napdos/gprs_gsm_modem/i-8213w- Configuring the boot mode Before starting at the first time, be sure that the switch is placed in the “0” position. I-8213W-4G Quick Start, E-mail:...
Page 2
Step 1: Install the module hardware on the XP-8000 Step 2: Switch to ”2”, Close EWF Step 3: Reboot XP-8000 Step 4: After Reboot, Install USB Driver(I-8213W-4G USB driver V1.00.exe) Step 5: Finish the USB Driver Installation, please check the USB Com Port Step 6: Switch to “0”, Open EWF...
Page 3
Communications → Hyper Terminal → Input new connection name → Click “OK” → Select USB Interface “I-8213W-4G AT command Port”→ Click “OK” Step 2: File → Properties → Settings → Click “ASCII Setup…” → Select “Echo typed character locally” → “OK”...
Page 4
Technical Support If you have any questions about I-8213W-4G, please contact us Email: Service@icpdas.com I-8213W-4G Product Website: http://m2m.icpdas.com/i-8213w-4g_TC.html I-8213W-4G Quick Start, E-mail: service@icpdas.com...