Table of Contents
Advertisement
TN-S900-A (Attenuator)
5.20.4 Specifications
Attenuator Specifications
TABLE 5-11
Parameter
Unit Dimensions
Environmental
5.20.5 Conformance
Certificate Number CU 72040104 01. Tested to Tested to UL 60950:2000, CAN/CSA-
C22.2 No. 60950-00. Certified under 47 CFR Part 68 Connection of Terminal Equip-
ment to the Telephone Network.
Attentuator Safety Guidelines
When using telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to personnel, including the following:
•
•
•
•
Use caution when installing or modifying telephone lines.
5-36
Telesyn Wiring Solutions (Appendix)
Criteria
Width - 1.6 in (40 mm)
Height - 1.0 in (25 mm)
Length - 2 in (50 mm)
Length of attached RJ45 cable - 4 in (100 mm)
Designed to be used in indoor applications
Long time operation temperature - 41°F - 104° F (5° - 40°C)
Short time operation temperature - 32°F - 122°F (0° - 50°C)
ETS 300 019, class 3.2
Storage and transportation - 68°F - 185°F (20° - +85°C)
MIL-STD-202 method 107
Operational humidity:
Long time operation humidity - 5 - 85%
Short time operation humidity - 5 - 90%
Note: Short time period is within 72 continuous hours and 15 days in
a year
Withstands normal shipping and handling shock.
Do not use this product near water for example near a bath tub, wash bowl, kitchen,
sink or laundry tub, in a wet basement or near a swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Never touch uninsulated telephone wiring or terminals unless the telephone line has
been disconnected at the network interface.
Specifications
Advertisement
Table of Contents
