Cabinet Solutions - Allied Telesis ADSL8S Wiring Manual

Cabinet Solutions

2.9 Cabinet Solutions
ADSL8S
cards
ADSL ADSL ADSL
8 8 8
PULL FAULT I N SERV
A
Order one 24 circuit surge protector adapter assembly for every 3 ADSL8S cards (one adapter assembly
protects 3 ADSL8S cards).
Connect the ground cable from the surge protector adapter assembly to GND.
1.
Connect 3 RJ21 connectors to the ADSL8S cards.
2.
Identify the specified circuit on the cabinet surge protector.
3.
Remove the protection module for the specified circuit from the cabinet surge protector.
4.
Connect the circuit from the surge protector adapter assembly into the cabinet surge protector.
5.
Install a protection module on the surge protector adapter assembly for the specified circuit.
6.
2-20
Allied Telesyn Wiring Solutions (CO-Based Solutions)
A
Surge Protector Adapter Assembly
FIGURE 2-7
Part Number Description
AT-TN-K026-A 24 circuit surge protector adapter assembly
_ ft.
POTS
Surge Protector
Circuits 0 - 23
To outside
plant facilities
and subscriber