Allied Telesis AT-TN129-A Specifications

Datasheet | integrated Multiservice Access Platform
ADSL24SA
AT-TN129-A 24 Port ADSL2+ with Splitters Service Module
High Performance ADSL2+ with
Integrated POTS Splitters
The ADSL24SA (Annex A) is a 24 port
ADSL2+ service module for the Allied Telesis
iMAP with integrated POTS splitters.The
splitters are designed for use with 600ohm
telephone loops and provide advanced
interference circuitry to minimize ADSL2+
crosstalk.The ADSL24SA is designed to meet
the most demanding broadband and Triple Play
applications and ideal for space restrictive or
low density applications.
Each of the 24 subscriber ports can
simultaneously support any of the standard
ADSL modes - ADSL2+, G.DMT, S=1/2, or
T1.413 - on a per port basis. A powerful DSP
implements all ADSL algorithms and allows
future and emerging ADSL2+ features to be
added through simple software upgrades.
In ADSL2+ mode, a subscriber port can deliver
up to 26Mbps of downstream bandwidth -
enough to support up to five set-top boxes of
standard digital video - plus headroom for VoIP
and data traffic.Traffic priority can be
differentiated by service type so that VoIP, video,
and data can be prioritized from a single port
based on your business needs.
Allied Telesis Allied Telesis
Performance You Can Depend On
Allied Telesis is the only broadband access
vendor that provides a complete end-to-end
ADSL solution. Service Providers can maximize
real world downstream rates and DSL reach
when they use the ADSL24SA together with
our patent pending optimized interconnect
system.This unique system maximizes both
revenue and subscriber satisfaction.
A complete set of management counters
monitor ADSL performance at each end of the
link. Every performance monitor counter can be
assigned a threshold that will generate an alarm
if the threshold is exceeded.
Part of Allied Telesis' IP Broadband
Access Family
Whether it is broadband ADSL2+, FTTH or
POTS, the iMAP family is the ideal platform for
last mile service delivery.The ADSL24SA line
card can be used with any of the iMAP family
of carrier grade, IP Multiservice Access
platforms:
• iMAP 9700 (9RU, 17 service slots)
• iMAP 9400 (3RU, 7 service slots)
• MiniMAP 9100 (1RU, 3 service slots)
Provisioning, management, and diagnostics of
subscriber ports can be accomplished from
either the iMAP command line interface or the
NMS.
The AT-TN129 has been designed to survive
the most rugged environmental conditions. It
can be confidently deployed in either a central
office or in outdoor enclosures withstanding
extremes of heat, cold, and light exposure.
Key Features
• 24 ADSL2+ ports
• ADSL Annex A
• 1Gbps backplane link
• Automatic or manual selection of ADSL2+,
G.DMT, S=1/2, or T1.413 modes
• Flexible control of traffic priorities for
voice, video, data applications
• Video-optimized
QoS
• Four Queues
• Priority scheduling
• VC to VLAN Mapping
Security
• MAC limiting (up to 64)
• MAC flooding – VLAN-based
Services Supported
• High Speed Internet
• VoIP
• IPTV
• Business VPN
• Gaming
Allied Telesis' iMAP family of integrated
Multiservice Access Platforms
www.alliedtelesis.com www.alliedtelesis.com