Table of Contents
Advertisement
Cancelling the process
Touch any sensor control.
Resetting settings
Resetting is not required when
replacing the router.
Switch the hob on.
Place an induction-compatible item
of cookware on the hob.
Touch and hold the 0 and 9 sensor
controls on the numerical display at
the same time for 6 seconds.
The seconds can be seen counting
down in the timer display. After this time
has elapsed, the code : is displayed
in the timer display for 10 seconds.
Reset the settings if you are disposing
of your hob, selling it or putting a used
hob into operation. This is the only way
to ensure that all personal data has
been removed and the previous owner
will no longer be able to access the
hob.
Before using for the first time
23
Advertisement
Table of Contents
