Miele KM 7678-2 FL Operating And Installation Instructions page 8

Hide thumbs Also See for KM 7678-2 FL:
Table of Contents

Advertisement

Warning and Safety instructions
This hob must not be used in a non-stationary location (e.g. on a
ship).
Never open the casing of the hob.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
While the hob is under warranty, repairs should only be
undertaken by your Miele dealer. Otherwise the warranty is
invalidated.
Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
The hob is not intended for use with an external timer switch or a
remote control system.
The hob must be connected to the electricity supply by a qualified
electrician (see "Installation – Electrical connection").
If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
"Electrical connection" in the "Installation" chapter).
The hob must be disconnected from the mains electricity supply
during installation, maintenance and repair work. Ensure that power
is not supplied to the appliance until after it has been installed or
until any maintenance or repair work has been carried out.
Danger of electric shock. Do not use the hob if it is faulty, or if the
ceramic surface is cracked, chipped or damaged in any way. Switch
it off immediately, disconnect it from the mains electricity supply and
contact your Miele dealer.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 7878-2 fl diamondKm 7897-2 fl diamond

Table of Contents