Table of Contents
Advertisement
INSTALLING BATTERIES
1.
The battery cover is located on the back of the
monitor. Remove battery cover by pressing down
and pulling away from the
monitor.
2. Install batteries according to the polarity indications
inside the compartment
(Fig. 2).
Battery Type: 2
Alkaline LR03 (AAA) size.
NOTE: For easy battery removal, place batteries
on top of the ribbon located inside of the battery
compartment.
3.
Replace the cover by inserting it back into place.
Replace the batteries if:
• The low battery symbol appears.
1.
3.
• When any button is pressed and nothing is displayed on the screen.
NOTE:
• If batteries are removed or replaced, the date and time will need to be
re-set either manually or automatically using your
Bluetooth®
mobile
device.
• Replace all batteries at one time (as simultaneous
set).
Use only 1.5V
"AAA"
alkaline
batteries.
DO NOT mix
alkaline,
standard (carbon-zinc) or
rechargeable (cadmium) batteries.
• When the batteries are removed, the measurement values stored in
memory are retained. However, the date and time must be reset.
• Remove batteries when unit is not in use for extended periods of
time.
• Clean contacts on battery and in battery compartment with a
soft,
dry cloth
each time you install
batteries.
• Batteries are hazardous waste. DO NOT dispose of them together with
the household garbage.
• DO NOT dispose of batteries in fire. Batteries may explode or leak.
• Recycle or dispose of properly in accordance with local, state,
province, and country regulations.
Advertisement
Table of Contents
