Care, Maintenance, & Cleaning - HoMedics BPW-930BT Manual

CARE, MAINTENANCE, & CLEANING
• Clean the blood pressure monitor body and cuff carefully with a slightly
damp, soft cloth. DO NOT press. DO NOT wash cuff or use chemical
cleaner on it. Never use thinner, alcohol, or petrol (gasoline) as cleaner.
• Make sure the cuff is completely dry before using.
• Leaky batteries can damage the unit. Remove the batteries when the unit
will not be used for a long time.
• Follow local ordinances and recycling instructions regarding disposal or
recycling of the device and device components, including batteries.
• If the unit is stored near freezing, allow it to acclimate to room temperature
before use.
• This blood pressure monitor is not field serviceable. You should not use
any tool to open the device nor should you attempt to adjust anything
inside the device. If you have any problems with this device, please contact
HoMedics Consumer Relations (contact information on warranty page).
• DO NOT immerse the unit in water as this will result in damage to the unit.
• DO NOT subject the monitor or cuff to extreme temperatures, humidity,
moisture, or direct sunlight. Protect from dust.
• DO NOT fold the cuff tightly.
• DO NOT disassemble the monitor or cuff. If in need of repair, refer to the
warranty section of this manual.
• DO NOT subject the monitor to extreme shocks (DO NOT drop on floor).
• DO NOT inflate the cuff unless wrapped around wrist.
• DO NOT
wrap the cuff around body parts other than your wrist.
• DO NOT drop or insert any object into any opening.
• This monitor may not meet its performance specifications if stored or used
outside of these temperature and humidity ranges:
Storage/Transportation
Environment
Temperature:
-13°F-158°F
(-25°C-?0°C)
Humidity:
Less than 93% RH
Operation Environment
Temperature:
41 °F-104°F
(5°C -40°C)
Humidity:
15 - 93% RH
Atmospheric Pressure:
700hPa-1060hPa