Installing Batteries - HoMedics BPA-260 Manual

INSTALLING BATTERIES

1. P ress down on latch and lift the battery cover to open
the battery compartment.
2. Install or replace 4 "AA " sized batteries in the battery
compartment according to the indications inside the
compartment.
3. Close the battery cover by pushing in the top end of
the battery door.
Replace the batteries if:
1. T he weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace
all batteries at one time (as simultaneous set). Use only
1.5V AA alkaline batteries. Remove batteries when unit is
not in use for extended periods of time. Date and time will
need to be reset if batteries are removed or replaced. Clean
contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
Note: Batteries are hazardous waste. Do not dispose of
BPA-260_A 323101305 0623.indd 12
them together with the household garbage.
Battery
Cover
12
2010/6/23 下午 10:04