Table of Contents
Advertisement
INSTALLING BA TT.ERIES
1 . Press down on latch and lift the battery cover to open the
battery compartment.
2. Install or replace 4 "AAA" sized batteries in the battery
compartment according to the indications inside the
compartment.
3. Close the battery cover by pushing in the top end of the
battery door.
_ _ _ _
Battery
Cover
1-e®
A
Replace the batteries if:
~
• The low battery symbol appears on the display.
• Nothing appears on the display when the power is switched on.
Note:
• Date and time will need to be reset if batteries are removed or
replaced.
• Replace all batteries at one time (as simultaneous set). Use
only 1.5V "AAA" alkaline batteries. Do not mix alkaline, standard
(carbon-zinc) or rechargeable (cadmium) batteries.
• Remove batteries when unit is not in use for extended periods of
time.
• When the batteries are removed, the measurement values stored
in memory are retained. However, the date and time must be
re-set.
• Clean contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
• Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
• DO NOT dispose of batteries in fire. Batteries may explode or
leak.
• Recycle or dispose of properly in accordance with local, state,
province, and country regulations.
Advertisement
Table of Contents
