Maintenance Schedule - Wallenstein BXT72S Operator's Manual

BXT72S
Wood Chipper

9.3 Maintenance Schedule

IMPORTANT! For more information, see the engine
manufacturer's manual.
Task
Check the engine oil level and quality.
Check the engine fuel level.
Clean the engine around the muffler and controls.
Check that all the fasteners are torqued to the
correct specifications.
Check that the wheel lug nuts are torqued to the
correct specifications.
Remove all debris and entangled material.
Check the drive belt operation.
Check the rotor knife, ledger knife, and twig breaker
sharpness.
Check the battery condition.
Lubricate pivot points and hinges.
Grease the machine.
Check the drive belt tension and alignment.
Check the tire pressure.
Clean the machine.
Clean the engine air filter.
2
Service the engine exhaust system.
Change the engine oil and replace the oil filter.
Replace the engine spark plug.
Check the valve clearance.
Replace the engine fuel filter.
Service the engine cooling system.
Replace the engine air filter.
3
Clean the oil-cooler fins.
2
Replace the air filter safety filter.
1 N/A indicates that a reference is not applicable.
2 In dusty conditions or when airborne debris is present, clean more often.
3 Every third air filter change, replace the air safety filter.
50
8 hours hours or
or daily annually
2
Complete maintenance tasks at the specified time or hour
interval, whichever comes first.
100 400
hours or 250 hours or
annually hours annually
49
Service and Maintenance
600
hours or
annually Reference
See page 30.
See page 32.
N/A .
1
See page 69.
See page 70.
N/A.
See page 56.
See page 60.
See page 54.
See page 52.
See page 51.
See page 56.
See the tire sidewall.
See page 64.
See page 54.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.