Maintenance Schedule - Wallenstein BXT52S Operator's Manual

Service and Maintenance

9.3 Maintenance Schedule

IMPORTANT! For more information, see the engine
manufacturer's manual.
Task
Check the engine oil level and quality.
Check the engine fuel level.
Clean the engine around the muffler and controls.
Check that all the fasteners are torqued to the correct
specifications.
Check that the wheel lug nuts are torqued to the correct
specifications.
Remove all debris and entangled material.
Check the drive belt operation.
Check the rotor knife, ledger knife, and twig breaker
sharpness.
Check the battery condition.
Lubricate pivot points and hinges.
Grease the machine.
Check the drive belt tension and alignment.
Check the tire pressure.
Clean the machine.
Service the engine exhaust system.
Clean the engine air filter.
2
Change the engine oil and replace the oil filter.
Replace the engine spark plug.
Check the valve clearance.
Replace the engine fuel filter.
Service the engine cooling system.
Replace the engine air filter.
3
Clean the oil-cooler fins.
2
1 N/A indicates that a reference is not applicable.
2 In dusty conditions or when airborne debris is present, clean more often.
3 Every third air filter change, replace the air safety filter.
8 hours
or daily
2
Complete maintenance tasks at the specified time or hour
interval, whichever comes first.
50 100
hours or hours or 250
annually annually hours
50
BXT52S
Wood Chipper
400
hours or
annually Reference
See page 31.
See page 33.
N/A .
1
See page 70.
See page 71.
N/A.
See page 57.
See page 61.
See page 55.
See page 53.
See page 52.
See page 57.
See the tire sidewall.
See page 65.
See the engine manual.
See page 55.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.
See the engine manual.