Controls; Emergency Stop Button; Engine Controls - Wallenstein BXT72S Operator's Manual

Controls

5. Controls
WARNING!
Do not operate the machine until you are
thoroughly familiar with the position and function
of the various controls. Read the operator's
manual thoroughly. Your safety is involved!

5.1 Emergency Stop Button

IMPORTANT! Only use the emergency stop button in an
emergency. Frequent use of the emergency stop button can
damage the machine.
An emergency stop button (commonly called an E-stop) is
located on the front of the chipper hopper.
In the event of an emergency, press the emergency stop button
to immediately stop the machine. The button stays on (pressed)
until it is reset.
The emergency stop button has two states:
Off The emergency stop is off. The machine can
operate.
On The emergency stop is on (the button is
pressed). The machine cannot operate.
To reset (turn off) the emergency stop button,
turn the button clockwise and pull.
Figure 8 – Emergency stop button

5.2 Engine Controls

Before you start the engine, read and understand
the safety and operating information under
W065
Engine Operation on page 29.
IMPORTANT! For complete information about the engine
controls, see the engine manufacturer's manual.
2
1
02027
1. Throttle control
2. Tachometer, hour meter, and check engine light
3. Ignition switch
02321
22
WARNING!
3
Figure 9 – Engine controls
BXT72S
Wood Chipper