Maintenance Schedule - Wallenstein BXC34 Operator's Manual

Service and Maintenance

7.3 Maintenance Schedule

Perform maintenance procedures at time shown or hour interval,
whichever comes first.
As Required
Visually check drive belt tension.
Remove entangled material from chipper.
Check that all fasteners are tight.
Every 8 hours or Daily
Check engine oil level.
Check fuel level.
Perform Pre-operation check.
Periodically inspect rotor blades,
ledger knife, and twig breaker.
Every 50 hours or Annually
Clean engine air filter.
Check drive belt tension and sheave
alignment.
Check rotor blade sharpness.
Check ledger knife sharpness.
Check twig breaker.
Every 100 hours or Annually
Change engine oil.
Change engine air filter.
Clean machine. Remove debris and
entangled material.
Change fuel filter.
Grease rotor bearings.
See page 22
—
See engine manual
See page 32
See page 35
See page 36
See page 41
See engine manual
See engine manual
—
See engine manual
See page 31
30
BXC34
Cart Chipper