Safety Label Definitions - Wallenstein BXT52S Operator's Manual

Safety Labels

3.3 Safety Label Definitions

1. Warning!
Impact, cut, and puncture hazards
The machine releases wood chips fast
enough to cause personal injury and
property damage.
Stay away from the discharge chute and
the area where the discharge chute is
pointed. Do not point the discharge chute
at people, animals, or structures.
2. Warning!
Burn hazard
The area is hot and can cause burns if
touched.
Keep hands and body parts away from
this area. Wait for the machine to cool.
Use a no-touch thermometer to measure
the temperature.
3. Warning!
Turn off the machine before service or
maintenance
Working on a machine that it is not in a
safe condition can cause serious injury
or death.
Stop the engine, remove the key, and
disconnect the spark-plug wire before
starting any service or maintenance
procedures.
4. Warning!
Entanglement, pinch, and crush hazards
Keep hands away from this area. Do not
put your hands inside the guard.
Do not operate the machine with a guard
removed. Make sure that all of the guards
and shields are installed and the covers
are closed before you start the machine.
Rotating parts that can entangle, pinch,
or crush fingers and hands are exposed
when the guard is removed.
5. Warning!
Risk of cancer and
reproductive harm
The machine materials
contain chemicals or
machine operation can
produce gases or dust that
are identified by the state
of California as causes of
cancer, birth defects, or
other reproductive harm.
This warning is a
requirement of the state of
California, USA to comply
with Proposition 65: the Safe
Drinking Water and Toxic
Enforcement Act of 1986.
16
BXT52S
Wood Chipper