Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
1. Make sure there are no any bolts or the hydration system in the bike frame. If yes,
please help to remove them.
2. Apply grease to the M5x14 (2) bolts.
3. Use the bolts and washers to attach the cage to the frame.
4. Put the bottle in the cage.
* Torque the bolts to a maximum of 3Nm.
HOW TO USE
Filling the bottle
1. Praise the cap off by inserting your fingers under the removal tab.
2. Fill the bottle with your choice of fluid.
3. Reinstall the cap by first lining up the bottle and cap, then pressing firmly.
RZ3 Drink Bottle Cage
5
Advertisement
Table of Contents
Need help?
Do you have a question about the RZ3 and is the answer not in the manual?
Questions and answers