Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Profile Design ERGO+ ARMREST KIT
Summary of Contents for Profile Design ERGO+ ARMREST KIT
- Page 1 Ergo+ & Race+ Armrest Kits ERGO+ & RACE+ ARMREST KITS REVISION 01-05-25-2022...
-
Page 2: Tools And Materials Required
Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's warranty policy. If you are not familiar with installation of Aerobars or their accessories, please seek the assistance of your local Profile design dealer by logging on to www.profile-design.com and using "dealer search"... - Page 3 If anything is missing from the Armrest kit please contact your dealer. Please note that threaded areas have been pre-treated by Profile Design during production with a special blue thread locking compound. This special compound is easy to detect on the threads of all bolts provided. If you cannot detect this thread locking compound or you are re-installing the bolt, re-apply a suitable blue thread locking compound as available from Loctite®...
-
Page 4: Component List
Ergo+ & Race+ Armrest Kits COMPONENT LIST QTY. Ref.# Part.# Part Description Req. 200072 Armrest - Ergo+ W/Hook Sticker Side A(Left) 200073 Armrest - Ergo+ W/Hook Sticker Side B(Right) 685224 Pad - Ergo+/Race+ Ultra 10mm 685221 Armrest - Race+ W/Hook Sticker Side A(Left) 685222 Armrest - Race+ W/Hook Sticker Side B(Right) 685222... -
Page 5: Part Drawings
Ergo+ & Race+ Armrest Kits PART DRAWINGS 18.5 mm 18.5 mm 94.5 mm 108.5 mm 108.5 mm 108.5 mm ERGO+ RACE+ Pad available: 10mm Pad available: Tapered - 10mm center, 5mm edge... - Page 6 Ergo+ & Race+ Armrest Kits PRODUCT SPECIFIC SETUP LIMITATIONS • The armrests are not designed to be used in the reverse position.
-
Page 7: Torque Settings
Ergo+ & Race+ Armrest Kits TORQUE SETTINGS Ref.# Location Bolt Size Torque Armrest Bolts M6x12mm CS 4.7Nm (42 inlbf) -
Page 8: Installation Instructions
Ergo+ & Race+ Armrest Kits INSTALLATION INSTRUCTIONS 1. Apply a light coating of grease to the surface of the armrest mount to protect against corrosion. 2. Fasten the armrests to the brackets using the M6x15mm countersunk bolts, note that the armrests have an offset design so care is required to ensure each side is positioned in the same way. - Page 9 Ergo+ & Race+ Armrest Kits HOW TO INSTALL NEW ARMPADS 1. To fit the armrests first ensure the inner face of the armrest is free of lint and grease, if the armrest has previously had a hook and loop sticker applied the residue should first be removed either mechanically or with a citrus based solvent.
- Page 10 Ergo+ & Race+ Armrest Kits ARMREST USAGE WARNING Do not put force on the side of the armrests!
- Page 11 • Profile Design Worldwide Two Year Limited Warranty. • Profile Design, LLC (distributor) warrants to the original retail purchaser ("you") that the Profile Design product for which you received this warranty is free from defects in material and workmanship for (2) two years from the date of original retail purchase. For more details on this warranty, its exclusions and/or how to make a claim under the warranty please call +1 310.747.0085 extension 161 or visit...
- Page 12 Ergo+ & Race+ Armrest Kits 2677 El Presidio Street Long Beach, CA 90810 Ph: 310-884-7756 www.profile-design.com © Profile Design LLC...