Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's warranty policy. If you are not familiar with installation of handlebars or their accessories, please seek the assistance of your local Profile design dealer by logging on to www.profile-design.com and using "dealer search"...
Page 3
If anything is missing from the Handlebar kit please contact your dealer. Please note that threaded areas have been pre-treated by Profile Design during production with a special blue thread locking compound. This special compound is easy to detect on the threads of all bolts provided. If you cannot detect this thread locking compound or you are re-installing the bolt, re-apply a suitable blue thread locking compound as available from Loctite®...
DRV/GMR Handlebar INSTALLATION INSTRUCTIONS 1. Apply a thin coating of assembly compound to the inside faces of the stem clamp. 1.If you are using aerobars with this handlebar. 2. Install the stem as per the manufacturers instructions. 2. Apply a thin coating of assembly compound to the inside faces of the aerobar bracket clamp. 3.
Page 7
• Profile Design Worldwide Two Year Limited Warranty. • Profile Design, LLC (distributor) warrants to the original retail purchaser ("you") that the Profile Design product for which you received this warranty is free from defects in material and workmanship for (2) two years from the date of original retail purchase. For more details on this warranty, its exclusions and/or how to make a claim under the warranty please call +1 310.747.0085 extension 161 or visit...