Table of Contents
Advertisement
If the system has multiple sources of power, disconnect power from the system by unplugging all
power cables from the power supplies.
Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage
points or short out parts resulting in a risk of fire or electrical shock.
Do not attempt to service the device yourself. Refer all servicing to qualified service personnel.
If the following conditions occur, unplug the device from the wall outlet and bring it to qualified
service personnel for repair.
The power cord or plug has become damaged or frayed.
Liquid has been spilled into the device.
The device has been exposed to rain or water.
The device has been dropped, or the cabinet has been damaged.
The device exhibits a distinct change in performance, indicating a need for service.
The device does not operate normally when the operating instructions are followed.
Only adjust those controls that are covered in the operating instructions.
Improper adjustment of other controls may result in damage that will require extensive work by a
qualified technician to repair.
Rack Mounting
When extending the device out of the rack, ensure that the rack is smooth and stable.
Do not overload the AC branches that supply power to the frame; The carrying capacity of the
whole frame should not exceed eighty percent of the power of the branch.
Make sure that all equipment used on the rack – including power strips and other electrical
connectors – is properly grounded.
Ensure that proper airflow is provided to devices in the rack.
Ensure that the operating ambient temperature of the rack environment does not exceed the
maximum ambient temperature specified for the equipment by the manufacturer
Do not step on or stand on any device when servicing other devices in a rack.
The Eco PDU's Main Power Cord
Please use the power cord attached to this package. If it is necessary to replace the power cord
attached to this package with another power cord,
Please confirm that the power cable must meet at least the cable standards attached to this
package.
IP-based 8-port Switched Power Manager with 2 Cascaded Ports
44
-
-
IPM-8221
Advertisement
Table of Contents
