Table of Contents
Advertisement
Step 2. Individually go to each Slave PDU to configure the corresponding address.
After the modification, click the Save button to save the settings, then please restart the system
to apply the changes.
Figure 4-3-8-1 Cascade Setting for Slave Page Screenshot
Step 3. Use a RJ45 UTP cable to connect the cascade IN port of the Slave PDU from the cascade
OUT port of the Master PDU for establishing the connection between the Master PDU and
Slave PDU and so on. Then there are two Slave PDUs status will be displayed on the Master
PDU web page as below for example with two Slave PDUs connection.
Figure 4-3-8-2 Master PDU Home Page After Cascade Setting Screenshot
IP-based 8-port Switched Power Manager with 2 Cascaded Ports
30
-
-
IPM-8221
Advertisement
Table of Contents
