Dometic Oceanair Rollerblind Powered Installation And Operating Manual page 12

Installation
8.8 Electrical installation
Proceed as follows:
1. Check the voltage of the blind (see cable label).
2. Decide on the routing of the motor wire.
3. Choose a location for the control device.
4. Mount the control device at the chosen location.
5. Connect the blind according to the wiring diagrams for 12 Vg/24 Vg or
230 Vw (see DIAGRAMS leaflet).
Key to wiring diagrams (see DIAGRAMS leaflet)
Pos. Description
1 Power supply
2 Head rail
3 Head rail motor options
4 Junction box
5 Single pole double throw center off switch SPDT-CO (230 Vw only)
bk black
bn brown
bu blue
gn green
or orange
rd red
wh white
ye yellow
12
Rollerblind Powered
EN