#1
REMOTE
START
FLASHLIGHT
VEHICLE 2
EZ START
EZ-31DP II
For EZ-30DP II
The EZ-30DP II model does not include remote transmitters, as it is designed for the expansion of a "parent" remote
keyless or alarm system.
For EZ-31DP II
The transmitter supplied with this system has 1 button, flashlight and car 2 side button. The button configuration is
Factory-set and unchangeable. See Page 13 for additional information on how to use your remote to operate a
second vehicle equipped with an EZ-30 series II system.
For EZ-33DP II
The transmitter supplied with this system has 3 button, flashlight and car 2 side button. The button configuration is
Factory-set and unchangeable. See Page 13 for additional information on how to use your remote to operate a
second vehicle equipped with an EZ-30 series II system.
For EZ-34DP II
The transmitter supplied with this system has 4 button, flashlight and car 2 side button. The button configuration
is Factory-set and unchangeable. See Page 13 for additional information on how to use your remote to operate
a second vehicle equipped with an EZ-30 series II system.
BUTTON #3 and #4 (#1 on EZ-34DP II) Programmable for 1 or 2 button presses
These buttons are programmable for one or two button presses to activate trunk release or remote start. This
option is selectable by your installer.
*Default = 1 press*
USING THE REMOTE TRANSMITTER
#1
LOCK
EZ START
EZ-33DP II
#2
UNLOCK
LOCK
FLASHLIGHT
VEHICLE 2
TRUNK
#3
REMOTE
START
3
#1
FLASHLIGHT
VEHICLE 2
#3
EZ START
EZ-34DP II
#2
UNLOCK
#4
REMOTE
START