Download
Share
Print this page
CrimeStopper EZEE START EZ-45DP Operating Instructions Manual
  1. Manuals
  2. Brands
  3. CrimeStopper Manuals
  4. Remote Starter
  5. EZEE Start EZ-45DP
  6. Operating instructions manual
CrimeStopper EZEE START EZ-45DP Operating Instructions Manual

CrimeStopper EZEE START EZ-45DP Operating Instructions Manual

1-way paging remote engine starting & keyless entry system with 5 button sidekick remote control
Hide thumbs Also See for EZEE START EZ-45DP:

Advertisement

Quick Links

Download this manual See also: Instruction and Installation Manual
EZ-45DP/EZ-55DP
1-Way Paging Remote Engine Starting & Keyless
Entry System with 5 Button Sidekick Remote Control
-PRIMARY: These are features that must be connected in order for the system to operate properly i.e.
Remote Start connections, Flashing lights, Brake Reset. For programming, the hood pin and program button
are required.
-OPTIONAL: These are features are to be connected only if desired or agreed upon by the customer and the
installing dealer i.e. Door Locks, Trunk Pop, Dome Light Illumination, Horn-Honk, Anti-Grind, etc. These
features may also require additional parts and/or labor fees. Consult with your installer beforehand to be sure
of what is going to be installed with your particular system.
TECHNICAL SUPPORT: (800) 998-6880
Monday - Friday 8:00am - 4:30pm Pacific Std. Time
Web Site: www.crimestopper.com
E-mail: email@crimestopper.com
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV A – 11.11.2005
OPERATING INSTRUCTIONS
This device complies with FCC Rules part 15. Operation is
subject to the following two conditions: 1) This device may not
cause interference, and (2) this device must accept any
interference that may be received, including interference that
may cause undesired operation.
responsible for any radio or TV interference caused by
unauthorized
modification could void the user's authority to operate the
equipment.
The manufacturer is not
modification
to
this
equipment.
Such

Advertisement

loading

Related Manuals for CrimeStopper EZEE START EZ-45DP

Summary of Contents for CrimeStopper EZEE START EZ-45DP

  • Page 1 TECHNICAL SUPPORT: (800) 998-6880 Monday - Friday 8:00am - 4:30pm Pacific Std. Time Web Site: www.crimestopper.com E-mail: email@crimestopper.com CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 S. TAPO STREET, SIMI VALLEY, CA. 93063 REV A – 11.11.2005 OPERATING INSTRUCTIONS This device complies with FCC Rules part 15. Operation is...

  • Page 2: Table Of Contents

    Troubleshooting “Before You Call”………….…………..………………………………………….…………..….12-13 OPERATION CAUTIONS & WARNINGS CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this equipment. This system is designed to be professionally installed into a car or vehicle in which all items, such as parking brake and all associated components, door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect working condition.

  • Page 3: Remote Operation

    OPERATION: BUTTON 1 (Lock Symbol): · Press and release to Lock doors. · Press and Hold for more than 3 seconds to activate “Panic” feature. BUTTON 2 (Unlock Symbol): · Press and release to Unlock doors. For EZ-55DP only (Driver Door Priority Unlock) ·...

  • Page 4: Remote Engine Starting ,Idle Down Mode, Infinity Run Mode

    button #4 or #3 too quickly, the system may not start the engine or open trunk. REMOTE ENGINE STARTING REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press the remote start button for at least 1/2 second (Default) or twice if set for double press. 2) Parking lights flash once;...
  • Page 5 3) Engine & parking lights OFF, Doors re-lock/re-arm. REMOTE ENGINE STARTING Cont. ENTERING YOUR REMOTE STARTED VEHICLE: 1) With engine running, Remote Unlock system (If equipped) or open door with key. 2) Enter vehicle and be careful not to step on brake pedal! (Remote Start Reset). 3) Turn Ignition to ON/RUN position, then press brake pedal to reset the Remote Starter &...
  • Page 6 REMOTE ENGINE STARTING Cont. (IDLE DOWN MODE) IDLE DOWN MODE - EXITING THE VEHICLE: 1) With vehicle engine running with key, **press the Remote Start button for at least a 1/2 second or twice if set for double press. 2) Parking Lights will turn ON. 3) Doors will unlock, or if brake pedal is being depressed, doors will unlock when it is released.
  • Page 7 **Programmable for ½ second press or double press. This option is selectable by your installer. REMOTE ENGINE STARTING Cont. (Infinity Run Mode) INFINITY RUN MODE – EXITING THE VEHICLE: 1) With vehicle engine running with the key, **press the Remote Start button for at least 1/2 second, pause a few seconds, then press and release the remote start button a second time.

  • Page 8: Turbo Timer Mode

    selectable by your installer. TURBO TIMER MODE (OPTIONAL) The optional Turbo Timer mode allows the EZEESTART system to keep a Turbo or Turbo Diesel vehicle running for 1 to 5 minutes [selectively] after you remove the key, exit the vehicle, and lock the doors remotely. This is handy for turbo cool-down without the need for expensive turbo timers.

  • Page 9: Convenience And Safety Features

    RUNNING LIGHTS FLASH 1-5X CONVENIENCE AND SAFETY FEATURES KEYLESS ENTRY (POWER DOOR LOCK CONTROL, Optional) This system enables you to remotely lock and unlock the vehicle’s doors (if equipped with power locks) via remote control for safety and convenience. Note: This feature may require extra labor and/or parts to install. Press the Lock or Unlock transmitter button as you leave or come near the vehicle.
  • Page 10 REMOTE PANIC (Used only with Optional HORN HONK feature installation) For personal safety this unit now includes a panic feature. To sound the vehicle car horn, press the Lock Button on the remote for more than 2 seconds. The vehicle horn will honk along with flashing parking lamps for 1 minute. Reset Remote Panic by pressing either the lock or unlock button.

  • Page 11: Transmitter Programming

    (Unlock symbol) on the transmitter to unlock driver’s door only, then press the #2 button again within 2-4 seconds to unlock remaining doors. This feature is optional and requires additional parts and/or labor. HOOD OPEN SAFETY (Requires grounding hood pin installation) Prevents the engine from being Remote Started when hood is open and will shut OFF the engine if opened during while remote started.

  • Page 12: Vehicle Operation

    WAIT FOR (BLUE WIRE GROUNDED) 4 FLASHES PRESS 4X's START FLASH 2, 3, or 4 X's 2-VEHICLE OPERATION A single remote can control two different vehicles EZEESTART systems installed. However, both systems must be the same type. EZ-45DP/55DP are only compatible with each other. Programming: You must first Programming your remote for 2 vehicle operation:...
  • Page 13 seconds have elapsed, the remote will revert back to Car #1 operation. TROUBLESHOOTING: “BEFORE YOU CALL” SECTION UNIT WILL NOT ATTEMPT A START (KEYLESS ENTRY STILL FUNCTIONS NORMALLY): The unit is in Valet mode. Turn Ignition ON, press and hold valet/programming button for 6 seconds then turn key off.
  • Page 14 Anti-Theft system which may require a bypass module. Check with your installer to make sure that the bypass device (if equipped) is functioning properly. SYSTEM IS UNSUCCESSFUL AT REMOTE START DURING EXTREME COLD CONDITIONS: Please be aware that during sub-freezing conditions your remote starter may take more that one attempt to start or it may not successfully start the vehicle after 3 attempts.
  • Page 15 ONLINE TECHNICAL SUPPORT © 2005 Crimestopper Security Products http://www.crimestopper.com/index3.html...

This manual is also suitable for:

Ezee start ez-55dp