Page 1
StreetSiren User manual Updated January 12, 2023 StreetSiren is a wireless outdoor alerting device with a sound volume of up to 113 dB. Equipped with a bright LED frame and pre-installed battery, StreetSiren can be quickly installed, set up, and operate autonomously up to 5 years.
StreetSiren User manual | Ajax Systems Support 14/1/23, 4:00 µµ The Ajax security system can be connected to a central monitoring station of a security company. Buy street siren StreetSiren Functional elements 1. LED frame 2. Light indicator 3. Siren buzzer behind the metal net 4.
Page 3
2. Switch on the hub and check the internet connection (via Ethernet cable and/or GSM network). 3. Make sure that the hub is disarmed and does not update by checking its status in the Ajax app. https://support.ajax.systems/en/manuals/streetsiren/...
Page 4
StreetSiren User manual | Ajax Systems Support 14/1/23, 4:00 µµ Only users with administrator rights can pair the device with the hub Pairing the device with the hub: 1. Select Add Device in the Ajax app. 2. Name the device, scan or type the QR code (located on the detector body and packaging), and select the location room.
Page 5
(the default value is 36 seconds). Please note that only 10 sirens can be connected to one hub Icons Icons display some of the StreetSiren states. You can view them in the Ajax app, in the Devices menu. Icon Value...
Page 6
StreetSiren User manual | Ajax Systems Support 14/1/23, 4:00 µµ Learn more States Siren states can be found in the Ajax app: 1. Go to the Devices tab. 2. Select StreetSiren from the list. Parameter Value The temperature of the device which is measured on the processor and changes gradually.
Page 7
StreetSiren User manual | Ajax Systems Support 14/1/23, 4:00 µµ Battery Charge Battery discharged How battery charge is displayed in Ajax apps The status of the tamper that responds to demount or opening of the body: Open — the siren is removed from its SmartBracket mounting plate Closed —...
Page 8
Shows the status of the device: active, completely disabled by the user, or only notiOcations about triggering of the device tamper button are disabled. Temporary Deactivation The option is available for StreetSiren with Ormware version 3.71 and later. Firmware Siren Ormware version...
Page 9
Device No. Number of the device loop (zone) Settings To change the StreetSiren settings in the Ajax app: 1. Select the hub if you have several of them or if you are using the PRO app. 2. Go to the Devices tab.
Page 10
StreetSiren User manual | Ajax Systems Support 14/1/23, 4:00 µµ Learn more The siren responds to system alarms with the selected volume: Muted — the siren does not sound when the alarm is raised Quiet — 85 dB volume Alarm Volume Loud —...
Page 11
Switches the device to the volume test mode Volume Test What is Volume Level Test Switching the StreetSiren to the signal fade test mode (available in siren with Mrmware version 3.50 and later) Signal Attenuation Test What is Attenuation Test...
Page 12
What is Delay When Entering/Leaving When enabled, the siren beeps 1 to 4 times to indicate that opening detectors in the Disarmed system mode were triggered. The feature is available for StreetSiren with Ormware Chime on opening version 3.73.1.0 and later What is Chime...
Page 13
The volume level was measured 1 m away from the siren Setting up the processing of detector alarms Through the Ajax app, you can conOgure which detector alarms can activate the siren. This can help to avoid situations when the security system notiOes of LeaksProtect detector alarm or any other device alarm.
Page 14
5. Enable the Alert with a siren if the hub or detector lid is open option. Setting the response to pressing the panic button in the Ajax app The siren can respond to pressing the panic button in Ajax apps. Note that the panic button can be pressed even if the system is disarmed! For the siren to respond to pressing the panic button: 1.
Page 15
Lid opening 3. Select the sirens needed. Go back to Siren Settings. The set parameters will be saved. 4. Click Back. All values will be applied. StreetSiren with Ormware version 3.72 and later supports this function. How to set Chime https://support.ajax.systems/en/manuals/streetsiren/...
Page 16
NotiOcations are conOgured in two stages: setting up sirens and setting up opening detectors. Learn more about Chime Chime is supported by StreetSiren with Ormware version 3.73.1.0 and later. Siren settings 1. Go to the Devices menu.
Page 17
If a door or a window is open. If an external contact is open (available if the External Contact option is enabled). 6. Select the chime sound (siren tone): 1 to 4 short beeps. Once selected, the Ajax app will play the sound.
Performance Testing The Ajax security system allows conducting tests for checking the functionality of connected devices. The tests do not start straight away but within a period of 36 seconds when using the standard settings.
Page 19
If the detector has low or unstable signal strength even after moving, use a radio signal range extender StreetSiren is protected from dust/moisture (IP54 class), which means it can be placed outdoors. The recommended installation height is 2.5 meters and higher. Such a height hinders access to the device for intruders.
Page 20
It is strictly prohibited to disassemble the device under voltage! Do not use the device with a damaged power cord. Mounting Before mounting StreetSiren, make sure that you have selected the optimal location and it is in compliance with the guidelines of this manual! Installation process 1.
Using the double-sided adhesive tape is not recommended either for a temporary nor permanent Oxing. 3. Put StreetSiren on the SmartBracket panel and turn it clockwise. Fix the device with a screw. Fixing the siren to the panel with a screw makes it diYcult for intruders to remove the device quickly.
StreetSiren User manual | Ajax Systems Support 14/1/23, 4:00 µµ Tech specs Type of notiOcation Sound and light (LEDs) Sound notiOcation volume 85 dB to 113 dB at a distance of 1 m (adjustable) Operating frequency of the piezo annunciator 3.5 ±...
5. Quick Start Guide Warranty Warranty for the Limited Liability Company “Ajax Systems Manufacturing” products is valid for 2 years after the purchase and does not apply to the pre-installed battery. If the device does not work correctly, you should Orst contact the support service — in half of the...
Page 24
StreetSiren User manual | Ajax Systems Support 14/1/23, 4:00 µµ Subscribe to the newsletter about safe life. No spam Email Subscribe https://support.ajax.systems/en/manuals/streetsiren/ Ʃελίδα 24 από 24...
Need help?
Do you have a question about the StreetSiren and is the answer not in the manual?
Questions and answers