AJAX StreetSiren User Manual
  1. Manuals
  2. Brands
  3. AJAX Manuals
  4. Security System
  5. StreetSiren
  6. User manual

AJAX StreetSiren User Manual

Hide thumbs Also See for StreetSiren:
Table of Contents

Advertisement

Quick Links

Download this manual
StreetSiren User Manual
StreetSiren is a wireless outdoor alerting device with a sound volume of up to
113 dB. Equipped with a bright LED frame and pre-installed battery, StreetSiren
can be quickly installed, set up, and operate autonomously up to 5 years.
Connecting to the Ajax security system via the secured
StreetSiren communicates with the
sight.
The device is set up via the
The system noti es users of all events through push noti cations, SMS, and
calls (if activated).
StreetSiren operates with
or
ocBridge Plus
The Ajax security system can be connected to a central monitoring station of a
security company.
Updated September 28, 2021
hub
at a distance of up to 1,500 m in line of
Ajax apps
for iOS, Android, macOS, and Windows.
Ajax hubs
only and does not support connecting via
integration modules.
Jeweller
radio protocol,
uartBridge

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StreetSiren and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AJAX StreetSiren

Summary of Contents for AJAX StreetSiren

  • Page 1 StreetSiren User Manual Updated September 28, 2021 StreetSiren is a wireless outdoor alerting device with a sound volume of up to 113 dB. Equipped with a bright LED frame and pre-installed battery, StreetSiren can be quickly installed, set up, and operate autonomously up to 5 years.

  • Page 2: Functional Elements

    8. Place of xing the SmartBracket panel with a screw Operating Principle StreetSiren signi cantly improves the e ciency of the security system.With a high probability, its loud alarm signal and light indication is su cient to attract the attention of neighbors and deter intruders.
  • Page 3 StreetSiren is equipped with a tamper button and an accelerometer. The tamper button is triggered when the device body is opened, and the accelerometer is activated when someone’s try to move or dismount the device. Connecting Before starting the connection: 1.
  • Page 4 3. Tap Add — the countdown will start. 4. Switch on the device by holding the power button for 3 seconds. The on/off button is recessed into the body of the siren and quite tight, you can use a thin solid object to press it. For detecting and pairing to occur, the device should be located within the coverage of the wireless network of the hub (at the same protected object).
  • Page 5 (the default value is 36 seconds). Please note that only 10 sirens can be connected to one hub Icons Icons display some of the StreetSiren states. You can view them in the Ajax app, in the Devices menu.
  • Page 6 States Siren states can be found in the Ajax app: 1. Go to the Devices tab. 2. Select StreetSiren from the list. Parameter Value The temperature of the device which is measured on the processor and changes gradually. Displayed in 1°C increment.
  • Page 7 Connected — external 12 V power supply is connected to the siren Disconnected — siren powered by pre- installed batteries Volume level in case of alarm Muted — the siren does not sound when the alarm is raised Quiet — 85 dB volume Alarm Volume Loud —...
  • Page 8 Device No. Number of the device loop (zone) Settings To change the StreetSiren settings in the Ajax app: 1. Select the hub if you have several of them or if you are using the PRO app. 2. Go to the Devices tab.
  • Page 9 assigned. You can select one or all groups: When assigned to a group, the siren and its indication are related to alarms and events of this group When attached to all groups, the siren and its indication are related to alarms and events of all groups in the system Regardless of the group selected, the siren will Night Mode...
  • Page 10 StreetSiren and determine the optimal installation location Jeweller Signal Strength Test What is Jeweller Signal Strength Test Switching the StreetSiren to the signal fade test mode (available in siren with rmware version 3.50 and later) Signal Attenuation Test What is Attenuation Test...
  • Page 11 StreetSiren with rmware version 3.71 and later supports this function Learn more about temporary deactivation of devices Disconnects the siren from the hub and deletes Unpair Device its settings Siren beep settings When this option is enabled, the siren warns of...
  • Page 12 Setting up the processing of detector alarms Through the Ajax app, you can con gure which detector alarms can activate the siren. This can help to avoid situations when the security system noti es of LeaksProtect detector alarm or any other device alarm. The parameter is adjusted in the detector or device settings: 1.
  • Page 13 Setting the response to pressing the panic button in the Ajax app The siren can respond to pressing the panic button in Ajax apps. Note that the panic button can be pressed even if the system is disarmed! For the siren to respond to pressing the panic button: 1.
  • Page 14 Con rmed alarm Uncon rmed alarm Lid opening 3. Select the sirens needed. Go back to Siren Settings. The set parameters will be saved. 4. Click Back. All values will be applied. StreetSiren with rmware version 3.72 and later supports this function.
  • Page 15 Indication Event Indication Emits an acoustic signal (the duration depends Alarm on the settings) and the LED frame blinks red The siren LED frame blinks red twice in the lower right corner about every 3 seconds until the system is disarmed. An alarm was detected in the armed system (if after-alarm indication is enabled) The indication turns on after the siren has...

  • Page 16: Performance Testing

    If the detector has low or unstable signal strength even after moving, use a radio signal range extender StreetSiren is protected from dust/moisture (IP54 class), which means it can be placed outdoors. The recommended installation height is 2.5 meters and higher.

  • Page 17: Installation Process

    It is strictly prohibited to disassemble the device under voltage! Do not use the device with a damaged power cord. Mounting Before mounting StreetSiren, make sure that you have selected the optimal location and it is in compliance with the guidelines of this manual! Installation process 1.

  • Page 18: Maintenance

    Using the double-sided adhesive tape is not recommended either for a temporary nor permanent xing. 3. Put StreetSiren on the SmartBracket panel and turn it clockwise. Fix the device with a screw. Fixing the siren to the panel with a screw makes it di cult for intruders to remove the device quickly.

  • Page 19: Tech Specs

    Do not use any substances containing alcohol, acetone, gasoline, and other active solvents to clean the detector. StreetSiren can operate up to 5 years from pre-installed batteries (with the detector ping interval of 1 minute) or approximately 5 hours of constant signaling with buzzer.

  • Page 20: Complete Set

    4. Installation kit 5. Quick Start Guide Warranty Warranty for the “AJAX SYSTEMS MANUFACTURING” LIMITED LIABILITY COMPANY products is valid for 2 years after the purchase and does not apply to the pre-installed battery. If the device does not work correctly, you should rst contact the support service —...

Table of Contents